Terry,
Sorry for the delay. No. You cannot get full camber from one switch.
Even with the firmware version upgrade (1.2 - if it doesn't tell you the
version ist is older).
My only method of doing this is to "count clicks" on the VR1. You may
want to call Hitec and ask them direct. Maybe with enough calls they will
add it to another firmware release.
Tom Koszuta
Clarence Sailplane Society
(Buffalo) NY
http://www.bufflink.com/css/
----- Original Message -----
From: "terry" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 31, 2003 12:36 AM
Subject: [RCSE] Eclipse 7 and 4 servo wing
> Hi All,
> Is it possible to get full camber by moving just 1 switch? I can get the
> flaps to move up and down with the flt mode switch, but I can't get the
> ailerons to follow. I can get full camber with the VR1 knob, but of
course
> want this function with a switch.
> Thanks, Terry
> RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED] Please note that
subscribe and unsubscribe messages must be sent in text only format with
MIME turned off.
>
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
