Identify why they are buzzing. Disconnect the pushrods or clevis from the control surface, do they still buzz?
I'm flying 4, 5.33 and 6.7 meter span gliders with up to 13 servos in a plane and there is no buzzing. No beads, nor rings, nor any other kinky stuff. I do use twisted wire, lots of it. I try to also use 5 cell packs on the larger ships. PPM too, not PCM. Even use a plain ol' Hitec superslim RX, no fancy names. We flew that sucker out 50% further than you would ever dream of flying a TD ship this afternoon no problem.... My guess is that there is something binding... something a half a turn on the pushrod threads might resolve. Spending more isn't always the answer. Good luck, Lee Estingoy Overland Park, KS ----- Original Message ----- From: "Bob Pope" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Sunday, September 28, 2003 10:31 AM Subject: Re: [RCSE] Ferrite Beads > Ben Diss wrote: > > > I've got a couple of wing servos buzzing is a big 4M scale glider. I > > thought I'd try ferrite beads to see if that might help. I found > > where Horizon sells them for $9/ea. Is there a cheaper source? > > > > -Ben > > > > RCSE-List facilities provided by Model Airplane News. Send > > "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] > > Please note that subscribe and unsubscribe messages must be sent in > > text only format with MIME turned off. > > > > > Ben why bother? 10 feet out of your hand you don't hear them anymore. > My buzz too but, always have. Never a glitch problem. Beads your adding > weight for noise reduction, (here come the flames to tell me im tempting > faith.) > > BP > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.