This range/glitch question seems to be one where it is very difficult to get real world observations to match with theory. There must be some very subtle real world variables that have a big impact on radio reception. Or there are some elements of theory that are not well understood yet. I tend to get that warm cozy feeling about a new area of knowledge once the theory and the real world observations agree with one another. I'm not getting that feeling yet.
As part of my quest for that warm cozy feeling, I have some questions for the theorists:. Does antenna configuration matter? The Samba site shows some T shaped RX antennas where the wire coming from the RX goes to the middle of another wire. Should that work for 72MHZ also? What happens when you coil a bunch of the RX antenna inside the fuse? Does that have the same effect as shortening the antenna? What about doubling the antenna back against itself (assuming the antenna wire is insulated). Does the reciever still see a long antenna, or would that have the same effect as cutting off half of the antenna? Is there a difference between a 72MHZ Futaba transmitter and a 35MHZ Futaba transmitter other than the RF module that plugs into the back of it? When the spacemodeling team went to the World Champs last year, Futaba lent us some 35MHZ modules. It was our understanding that we could use these in our existing (originally 72MHZ) transmitters. When we had problems oversees and made some phone calls, we were told by (a Futaba technical person I think) that you can't just use a 35MHZ module in a 72MHZ transmitter. We did some fast research and bought a new Futaba transmitter in Prague. That (originally sold as 35MHZ) transmitter showed much greater ground range but still glitched badly in the air. Perhaps that was just due to the carbon issues, we may have had two problems originally. Our problems weren't solved until we switched to what we called "stealth 72". That is to say we just flew on 72MHZ and didn't say so (A sort of don't ask, don't tell policy). Now back at home I have been flying some contests using my lovely new Futaba 9CAP "35MHZ" transmitter with 72MHZ modules. It works just fine. A friend of mine who knows some RF theory says that you might expect a 35MHZ transmitter to work on 72MHZ but not the other way around. Something about energy output and the amount of energy in a 35MHZ vs. a 72MHZ signal. Have I perhaps been blasting the airwaves with double the FCC allowable transmitter output by transmitting on 72MHZ with a 35 MHZ transmitter? Did we have half the usual power output when we tried transmitting on 35MHZ with a 72MHZ transmitter? Does any of this make any sense at all? I would be interested to know if anyone else has tried lengthening 72MHZ RX antennas and what was the result. I put such an antenna in a HL model and saw no adverse effects on ground range. I flew another model with an antenna that must have been about double length. It was a HL model so much of the extra length was just coiled up inside the fuse. That model flew just fine. Eventually, if we get enough anecdotal evidence and we get enough theory, we can compare the two and find a way to make the two agree. The biggest disagreement I see so far is the "sacred 72MHZ RX antenna length" question. We need better theory or better/more real world testing to settle that one. Phil "In search of that cozy feeling" Barnes RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

