Okay, I'm trying real hard not to laugh.

That would look very kludgey on a $2,000 plane. I have taped on a tow hooks for my HLG and Flying wings, but only so I can remove them. Would never consider it for an unlimited ship. You know there will be up to (and possibly more than) 200 lbs of force on that tow hook.

<sigh>  "To each his own..."

Steve


At 04:26 PM 9/15/2004, Robert Samuels wrote:
Jim: One solution is a tape on tow hook. No, this is not a joke. I've been flying 3 meter planes with the tow hooks just taped on with strapping tape. I've never had one pull off. I make up a base out of fairly sturdy shim brass that is curved to fit the bottom of the fuse. It's about 1.5 inches wide and 3 inches long. I make up (bend) the hook out of a common nail. The head of the nail is silver soldered to the base using high strength silver solder, not Sta-Brite. The base is lined with double stick carpet tape and stuck to the bottom of the fuse. Then I use 3 or 4 strips of 1/2 inch strapping tape to finish the job. Works great.

Robert Samuels..........St. Louis


RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

Reply via email to