Date: Fri, 17 Sep 2004 07:46:00 -0700 From: Bill Malvey <[EMAIL PROTECTED]> To: rc Soaring Exchange <[EMAIL PROTECTED]> Subject: Re: [RCSE] How to Determine the Correct Incidence Message-ID: <[EMAIL PROTECTED]>
And my Artemis was spot on right out of the box. Which I believe was the original question. It was about the V-tail incidence on the Artemis.
On 9/17/04 4:58 Phil Barnes wrote:
What I really should have asked is: How do you determine the proper incidence on a sailplane?
It is less draggy to fly around with no deflection or minimal deflection on
the elevator/ruddervators. In setting the correct incidence all you are
doing is setting the tail incidence relative to the wing incidence such that
the elevator/ruddervators are neutral at the most commonly used airspeed.
Phil
~~~~~~~~~~~~~~~ Bill Malvey
Hello Phil & Bill,
There are a couple of ways to determine the wind incidence, and many people have different opinions and preferences based upon their strategies. Here is my personal preference and opinion: I feel that the most important phases in a sailplane's flight envelope is the thermalling and high speed cruise (sprinting from one thermal to another thermal) phase. Total drag is has a greater impact during the high speed cruise phase. So I try to optimise my sailplanes configuration to minimize drag during this phase. Determine what the speed is that the sailplane will typically fly at during the high speed cruise. Then, using the particular airfoil used on the sailplane, calculate what the lift coefficient is at that given speed and conditions. Use the airfoil's CL vs alpha polar to determine the angle of attack at which this CL would occur. Now that you know the angle of attach, I like to use this angle as the wing to fuselage incidence angle -- setting the wing incidence at this angle will allign the fuselage with the general freestream airflow, and thus minimize the drag caused by the fuselage at that given airspeed.
Regards,
Cameron Ninham email: cpn66 at hotmail dot com RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

