|
I wish others would talk about their techniques of
apply the covering around curved structures, top and bottom, if they've worked
out something that works well for them. The
directions that come with the roll leave a lot to be desired.
Over 40 years ago, I first used Monokote. Later I used others,
including Ultracote and the Century 21 and some of the "light" films, too. For a
while, I thought I might like Ultracote better, but eventually migrated back to
Monokote. The Ultracote, where overlapped, pulled away from itself and did not
stay drum tight as the Monokote tends to do. I finally chucked everything I had
except Monokote. I thought Century 21 was overpriced, over-hyped as to its
characteristics. The colored adhesive readily parted from the clear film when
you tried to reposition the stuff. I sent samples to the manufacturer who
claimed the contrary in its ads, but got no response.
----- Original Message -----
Sent: Sunday, October 10, 2004 5:11
PM
Subject: [RCSE] monokote....
AHHHHHH!!!!!!
Use Ultracote or Oracover it goes on those type structures much better
than Monocote.
EDG
Pittsburgh
|
