HERE IS THE LINK TO TOM'S WEB SITE
http://www.hoopesdesigns.com/


Clarence Ashcraft Transmitter Impound 98,00,02,04 [EMAIL PROTECTED]

Home of Soar Utah 2004
http://www.silentflyer.org/
----- Original Message ----- From: "Chris Kuhn" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, October 06, 2004 11:05 AM
Subject: [RCSE] Tom Hoopes



Dose anyone know if Hoopes Design is still offering
its harnesses and advice,comments.
Lift,
chris
--- [EMAIL PROTECTED] wrote:


------------------------ Yahoo! Groups Sponsor --------------------~--> $9.95 domain names from Yahoo!. Register anything.

http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/SyTolB/TM

--------------------------------------------------------------------~->


There are 25 messages in this issue.

Topics in this digest:

      1. RE: [RCSE] Escape Tip Aileron Mod
           From: David Hobby <[EMAIL PROTECTED]>
      2. RE: [RCSE] R and R, not RnR
           From: "Sheldon - YNT uDesign"
<[EMAIL PROTECTED]>
      3. RE: [RCSE] Old LSF guys.
           From: "Douglass Boyd"
<[EMAIL PROTECTED]>
      4. [RCSE] hi starts and more!
           From: Cheryl and Bill
<[EMAIL PROTECTED]>
      5. RE: [RCSE] Escape Tip Aileron Mod
           From: "George Voss" <[EMAIL PROTECTED]>
      6. Fw: [RCSE] Old LSF guys.
           From: "Harley Michaelis"
<[EMAIL PROTECTED]>
      7. [RCSE]
           From: "James V. Bacus"
<[EMAIL PROTECTED]>
      8. [RCSE] Re:Escape Tip Aileron Mod
           From: [EMAIL PROTECTED]
      9. [RCSE] Next seasons post flying beverage
           From: "James V. Bacus"
<[EMAIL PROTECTED]>
     10. [RCSE] Amazing
           From: Bill Malvey <[EMAIL PROTECTED]>
     11. RE: [RCSE] R and R, not RnR
           From: "Dr. Danny C Williams"
<[EMAIL PROTECTED]>
     12. Re: [RCSE] Amazing
           From: Steve Meyer <[EMAIL PROTECTED]>
     13. RE: [RCSE] R and R, not RnR
           From: "targetdrone" <[EMAIL PROTECTED]>
     14. [RCSE] Re: Amazing
           From: "Dave Kornberg" <[EMAIL PROTECTED]>
     15. [RCSE] Looking for SASS member
           From: "Jim Deck" <[EMAIL PROTECTED]>
     16. Re: [RCSE] Re: Amazing
           From: Bill Malvey <[EMAIL PROTECTED]>
     17. [RCSE] Visalia CVRC news paper artical
           From: "Larry Taylor"
<[EMAIL PROTECTED]>
     18. [Fwd: Re: [RCSE] Re: Amazing]
           From: [EMAIL PROTECTED]
     19. [RCSE] CVRC Web Page Update!!
           From: "Larry Taylor"
<[EMAIL PROTECTED]>
     20. Re: [Fwd: Re: [RCSE] Re: Amazing]
           From: Bill Malvey <[EMAIL PROTECTED]>
     21. RE: [RCSE] Launch height ..
           From: Eddie Smith
<[EMAIL PROTECTED]>
     22. RE: [RCSE] Launch height ..
           From: Eddie Smith
<[EMAIL PROTECTED]>
     23. Re: [RCSE] What do/would you pay?
           From: Eddie Smith
<[EMAIL PROTECTED]>
     24. [RCSE] FS - Super Nova 250S Charger
           From: "Sheldon - YNT uDesign"
<[EMAIL PROTECTED]>
     25. [RCSE] Re: respest
           From: [EMAIL PROTECTED]



________________________________________________________________________

________________________________________________________________________

Message: 1 Date: Wed, 6 Oct 2004 09:50:01 +1000 From: David Hobby <[EMAIL PROTECTED]> Subject: RE: [RCSE] Escape Tip Aileron Mod

Hello

During the preparation for the 2004 F3J World Champs
I purchased 3 Escapes.
Initially the wings were set up with the tip aileron
servos, but after some
experimenting, all my Escapes have the outer aileron
fixed. There was just
no perceivable difference in performance.

I firmly believe that competition thermal models
must be simple, easy to
maintain and robust. The last problem you need is a
unserviceable model in
a competition when there are plenty of other issues
to concern ones self
with. 2 extra servos (especially small servos with
fragile gears) are just
not worth the hassle.

The best way to become better in competition is to
become comfortable with
the flying qualities of your chosen model and
PRACTICE, PRACTICE, PRACTICE.
Chasing the ultimate model will only give small
gains. Most of the current
breed of competition models may have a performance
difference of, lets say,
3% between the worst and best. This difference can
easily be narrowed with
one or two stalls during a flight.

Regards

David Hobby - 2004 F3J WC


-----Original Message----- From: Edmonds, Terry D [SMTP:[EMAIL PROTECTED] Sent: Wednesday, 6 October 2004 5:08 AM To: [EMAIL PROTECTED] Subject: [RCSE] Escape Tip Aileron Mod

I have been flying Escapes for several years now and
have V-tail,  X-tail
and electric versions. The Escape certainly is one
of the top F3J and
unlimited models available today and the quality is
second to none. The tip
ailerons are a bit of a complication with advanced
programming required and
a little extra weight out on the wing tips. About a
year ago I began
experimenting flying the models with the tip
ailerons disabled. Careful
analysis revealed the tip ailerons really weren't
doing that much. Roll
response in the landing configuration was a little
better with the tip
ailerons activated but that could easily be
compensated for with a tad more
throw and expo in the main aileron. So for the last
year I have flying the
models with the tip ailerons taped shut and the
servos removed.



At the 2004 F3J World Champs in Canada I noticed the
Slovakian Team had
some Escapes with a link pin between the main and
tip aileron and were not
using tip aileron servos. I had considered that idea
before but didn't
think you could get a slop free connection because
of the compound angle
the two ailerons work at. I inquired with the pilots
about this and they
immediately went and got Jaro Muller (manufacture of
Escapes) to show me
how to do it. I have since installed this mod in one
of my Escapes and can
report it works perfectly and is slop free.



Here is how it is done. Pins are glued in place in
the main aileron and
then left free to slide in and out of the tip
aileron as the surfaces move
up and down. The pins are located mid chord of the
ailerons. Make pins from
3/64" music wire about ?" long. The tricky part is
getting alignment of the
two holes so the ailerons line up properly. Drill
the holes as nearly al
igned as you can but you probably will have to make
them oversize at first.
 Glue the pin in the main aileron with epoxy and
micro balloons straight
with the main aileron hinge line and projecting just
enough so the pin can
engage the outer hole when the ailerons are flexed
full down. You want the
pin to project as much as possible to avoid the
ailerons from accidentally
disengaging. At this point the main and tip ailerons
probably don't quite
line up so hog out the hole in the tip aileron in
the correct direction.
Put a drop of oil on the pin and a dab of epoxy in
the hole. Move the
aileron assembly to the full up position and tape
them in alignment until
the epoxy has cured. That's all there is to it.

=== message truncated ===


=====
Tnx & 73
CHRIS
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.




RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

Reply via email to