The neutrals need to be synchronized.  If you can reduce throws on 
the student box, do it.  Some systems can designate the 'channels' 
allowed to opperate on the trainer TX.  At least at first the 
instructor will be taking off and landing, so the student need only 
pitch and roll channels.   Regis   

--- In [EMAIL PROTECTED], Doug McLaren <[EMAIL PROTECTED]> wrote:
> On Fri, Oct 15, 2004 at 02:50:54PM -0400, Douglas, Brent wrote:
> 
> | Can anyone give me the quick idiot's guide to using a trainer 
cord?  Do
> | you have to trim both radios to match
> 
> Yes.  You do this by holding both transmitters and switching back 
and
> forth between transmitters and making adjustments until nothing
> changes when you switch.
> 
> | do they both need all the same mixing set up (eg, elevon, etc)?
> 
> Yes, unless you've got a high end `master' radio which can decode 
the
> slave signal then apply it's mixes to it.  The Futaba 9C can do it,
> and I don't think many other radios can (but I can't be sure.)
> 
> If your radio isn't one that can do this, you just need to make sure
> that the controls do the same things on both radios.
> 
> |  Is it considered "safer" to pull the crystal from the trainer 
box?
> 
> Yes, though that's not really needed.  I don't know about Hitec, but
> with Futaba you generally don't even turn the buddy box on.  If you 
do
> have to turn the buddy box on, I'd suggest removing the crystal or
> module just to be safe, though they should turn off the transmitter 
on
> their own.
>  
> | He's planning on using his regular Hitec radio and an older Flash 
that
> | he has lying around.
> 
> Just make sure that the controls are the same for master and slave
> before you fly :)
> 
> -- 
> Doug McLaren, [EMAIL PROTECTED]    For adult education nothing beats 
children.
> RCSE-List facilities provided by Model Airplane News.  
Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]  
Please note that subscribe and unsubscribe messages must be sent in 
text only format with MIME turned off.



RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and 
unsubscribe messages must be sent in text only format with MIME turned off.

Reply via email to