I used laminating film on a small foam plane and on my 2M 2x6. It has worked fine for me. See this link for a comment from Dean at Stealhead it is at post # 395. If you look at post # 244 it will see the other info on it. Below is some info from the #244 post.
This is the link. http://www.oregonlam.com/thermrf1.htm What I got was 1.5 mil (Gloss Thermal Polyester Laminating Film Adhesive Side In). Product code IS-011851x 8" x 500' 1.5 mil 1" core. $20.75 and $4.75 shipping. They have different size (1.2 mil 1.5 mil 3 mil 5 mil and 10 mil). They also have Matte finish. I sure wish they had colors. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Saturday, February 19, 2005 8:36 PM To: Soaring@airage.com Subject: [RCSE] Coverite's 21st Century Fabric Does anyone know if Coverite's 21st Century Fabric covering can be used in the same applications as Solortex. I'm looking for something that has a little more abrasion resistance than standard low heat shrinks or packing tape to cover a Zagi. Maurice RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
