I don't use camber sliders. I always use presets. Have you tried reflex? Do you have to make the aileron travel go to 150% for reflex to work properly? I always make sure that I have travels set so that camber moves the entire TE evenly. Either through increasing travel or increasing the mix rate. This is because I always use elevator to camber mix and want that to work right. Actual presets for camber, reflex, launch come later. The travel amounts have to be set to deal with whatever horn lengths and servo arms you have on your equipment. Besides long aileron horns (or short aileron servo arms, you might also have really short flap linkage. Do you have zero for the subtrim on the flaps, which means you are only using half the servo travel for down flap? You might be able to offset the flap neutral to use more servo travel to get down flap and adjust your flap horns.
If you don't use elevator to camber, or a slider, the 9303 can just use the flight mode presets which can be set individually for ailerons and flaps. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
