You need to delve further to find the technical specification. Again, the recommended cycle count will vary depending on contact material, plating thickness, and spring cotnact configuration. Go to the spring contact of choice then the datasheets...

Arne Ansper wrote:


On Tue, 1 Mar 2005, Simon Van Leeuwen wrote:

accomplished with wire-to-board connector systems and similar breakaway headers that are 2mm spacing (Milli Grid);

http://www.molex.com/customer.html?supplierPN=50394,51110:87089


They do not list the number of minimal guaranteed mating cycles there. Is this parameter important at all? For all the wire-to-board connectors that had this parameter listed it was from 25 to 50.

regards,
Arne
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format



-- Simon Van Leeuwen RADIUS SYSTEMS PnP SYSTEMS - The E-Harness of Choice Cogito Ergo Zooom

RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format

Reply via email to