I always use THICK FLEXABLE CA GLUE like IC 2000. Cut the end of the carbon rod off with diagonal cutters. This crushes and splinters the end a little and helps the glue grab on to the rod. Then I clean up the inside of the brass with a small file. Use plenty of glue so some glue forms a fillet at the end of the metal fitting. When I want to reuse the metal fittings from an old model I heat up the metal with a soldering iron and the fitting will pull lose.
Matt Gewain -----Original Message----- From: John Fruge [mailto:[EMAIL PROTECTED] Sent: Monday, March 07, 2005 10:29 AM To: soaring@airage.com Subject: [RCSE] Carbon Pushrod Help! I had a carbon pushrod brass end come off in flight over the weekend. I would like to hear options on putting on the brass ends to the carbon pushrods? Thanks, John Fruge RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format