Thanx for the replies, 400 mm aft of the LE at fuse C/L.

Regards, Dave Corven. 


> [EMAIL PROTECTED] wrote: 
> 
> >I get can't get in to the assembly instructions on the Kennedy Composites 
> website to access the AVA center of gravity.
> >
> >Does anyone care to share the AVA C of G with us this evening ?
> 
> 400 mm or 4 inches. It downloaded okay for me.
> 
> http://www.kennedycomposites.com/instructions/ava-v2.7.pdf
> 
> 6 6/30/2004
> Tips
> Tow hook can be located back from nose 18-1/8” for aggressive
> launching. This measurement is to rear side of tow hook. For initial
> launches move adjustable tow hook ¼” forward. When you are
> comfortable launching at this point, move tow hook rearward to fit
> your flying style.
> To set up decalage, mount center wing section and stabilizer. Hold
> model from the rear and set the imaginary line that goes through
> trailing edge and leading edge of stabilizer parallel with bottom of
> wing.
> Cant the elevator servo arm forward 15 degrees for more up elevator
> control throw.
> Suggested balance, control throws and mixer
> Balance: 400 mm or ~ 4" from leading edge of wing
> Rudder throw: + / - 2“ each way.
> Elevator throw: + ¾ “ - ½ “
> Spoiler: 7/8” up measured at trailing edge of spoiler
> Elevator mix: Up elevator to spoiler 70 % mix.
> Decalage: Align centerline of stabilizer parallel with bottom of wing.
> ©Kennedy Composites 2004
> 
> Mike
> -- 
> Winch Solenoid Safety Buzzer - http://www.vvsss.com/buzzer/
>                            _____
>           \__________________|__________________/
>                             (O)
> 
> 
> RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
> "unsubscribe" requests to [EMAIL PROTECTED]  Please note that 
> subscribe and unsubscribe messages must be sent in text only format with MIME 
> turned off.  Email sent from web based email such as Hotmail and AOL are 
> generally NOT in text format
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and 
unsubscribe messages must be sent in text only format with MIME turned off.  
Email sent from web based email such as Hotmail and AOL are generally NOT in 
text format

Reply via email to