Noel Since you are talking about the center section of a Graphite and hot melt glue just use your heat gun on the back side and soften the glue from the wing. At some point the glue will release all at once or you can peel the glue away a little at a time. Either way the heat guns heat will get you farther and safer than cutting. Edwin Wilson
--- In [EMAIL PROTECTED], [EMAIL PROTECTED] wrote: > Hello all, > > Any tips on how to gently remove a servo that's been hot-glue'd into the center section of a Graphite? The thin glass/sheeted center-section seems very fragile and the previous owner used a TON of hot glue on this flap servo that needs replacing... *sigh* Since it's not glued to plastic or carbon, I'm afraid to do any "shock-load" type trick to break the servo loose... Any thoughts or suggestions? > > Thanks a bunch! Take care, > > --Noel RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
