Hi,
I got a good deal on a 1/3 scale ASW-20 kit
made by Mark Smith/Dream Catcher Hobby. Unfortunately there are no plans
included and I need to know what thickness obechi the wing cores are cut for. I
did some research but no success. The common thickness for sheeting seems to be
1/42 here, but from what I found that seems to be too thin for a 5 meter wing.
There is a wing made by Mueller in Germany in the same size which is sheeted
with 1.2 mm which is roughly twice as thick.
Any info would be appreciated!
Frank
|
- [RCSE] 1/3 ASW-20 by Dream Catcher/Mark Smith Info Needed Frank Deichsel
- RE: [RCSE] 1/3 ASW-20 by Dream Catcher/Mark Smith Info... George Voss
- Re: [RCSE] 1/3 ASW-20 by Dream Catcher/Mark Smith ... Lee Estingoy
- Re: [RCSE] 1/3 ASW-20 by Dream Catcher/Mark Smith ... Frank Deichsel
- Re: [RCSE] 1/3 ASW-20 by Dream Catcher/Mark Smith Info... JIM EALY
- RE: [RCSE] 1/3 ASW-20 by Dream Catcher/Mark Smith Info... Marc Gellart