> The error for 1MB/s is 0,3%, not that bad, though. I would check the > cabling/routing of the CAN signals again. Has it worked with that board > already in the past? Check with an oscilloscope, if you have the chance?
The system has worked in the past. The 'scope appears to be good at first glance, but we'll need to look at the signals in more depth. Could be some weird transients causing problems. I'll compare this board rev against our old one to see if that impacts anything. Chris _______________________________________________ Socketcan-core mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-core
