Hello,
this patch series adds support for freescale's flexcan core to the mx28
architecture. The flexcan can driver supports mx28 without any modifications.
This series has been successfully tested on a Ka-Ro tx28 board.
It's based on Sascha's imx-for-2.6.39 tree and can be pulled from:
The following changes since commit df42c8a720ff2e0d52d187bb1120339e79f58604:
ARM: mx5/board-mx53_evk.c: Make UART1 functional (2011-02-01 10:26:12 +0100)
are available in the git repository at:
git://git.pengutronix.de/git/mkl/linux-2.6.git imx-for-2.6.39/msx-flexcan
Marc Kleine-Budde (2):
ARM: mxs: adjust flexcan clock definition
ARM: mxs: dynamically register flexcan devices for mx28
arch/arm/mach-mxs/clock-mx28.c | 4 +-
arch/arm/mach-mxs/devices-mx28.h | 6 +++
arch/arm/mach-mxs/devices/Kconfig | 4 ++
arch/arm/mach-mxs/devices/Makefile | 1 +
arch/arm/mach-mxs/devices/platform-flexcan.c | 51 +++++++++++++++++++++++
arch/arm/mach-mxs/include/mach/devices-common.h | 12 +++++
6 files changed, 76 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-mxs/devices/platform-flexcan.c
regards, Marc
_______________________________________________
Socketcan-core mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/socketcan-core
