Hello,
I had a discussion regarding this with Wolfgang:
http://www.mail-archive.com/[email protected]/msg00324.html
The problem here is that we must configure the mailbox ID's and this support
is not available in the socketCan sub-system.
--------------------------------------------------
From: "Kurt Van Dijck" <[email protected]>
Sent: Friday, February 11, 2011 8:36 PM
To: "Subhasish Ghosh" <[email protected]>
Cc: <[email protected]>;
<[email protected]>; <[email protected]>;
<[email protected]>; <[email protected]>; "Wolfgang Grandegger"
<[email protected]>; "open list:CAN NETWORK DRIVERS"
<[email protected]>; "open list:CAN NETWORK DRIVERS"
<[email protected]>; "open list" <[email protected]>
Subject: Re: [PATCH v2 09/13] can: pruss CAN driver.
On Fri, Feb 11, 2011 at 08:21:28PM +0530, Subhasish Ghosh wrote:
+config DA8XX_PRU_CANID_MBX0
+ hex "CANID for mailbox 0"
+ depends on CAN_TI_DA8XX_PRU
+ default "0x123"
+ ---help---
+ Enter the CANID for mailbox 0
+ Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX1
+ hex "CANID for mailbox 1"
+ depends on CAN_TI_DA8XX_PRU
+ default "0x123"
+ ---help---
+ Enter the CANID for mailbox 1
+ Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX2
+ hex "CANID for mailbox 2"
+ depends on CAN_TI_DA8XX_PRU
+ default "0x123"
+ ---help---
+ Enter the CANID for mailbox 2
+ Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX3
+ hex "CANID for mailbox 3"
+ depends on CAN_TI_DA8XX_PRU
+ default "0x123"
+ ---help---
+ Enter the CANID for mailbox 3
+ Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX4
+ hex "CANID for mailbox 4"
+ depends on CAN_TI_DA8XX_PRU
+ default "0x123"
+ ---help---
+ Enter the CANID for mailbox 4
+ Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX5
+ hex "CANID for mailbox 5"
+ depends on CAN_TI_DA8XX_PRU
+ default "0x123"
+ ---help---
+ Enter the CANID for mailbox 5
+ Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX6
+ hex "CANID for mailbox 6"
+ depends on CAN_TI_DA8XX_PRU
+ default "0x123"
+ ---help---
+ Enter the CANID for mailbox 6
+ Default value is set to 0x123, change this as required.
+
+config DA8XX_PRU_CANID_MBX7
+ hex "CANID for mailbox 7"
+ depends on CAN_TI_DA8XX_PRU
+ default "0x123"
+ ---help---
+ Enter the CANID for mailbox 7
+ Default value is set to 0x123, change this as required.
Why is filling the mailboxes the job of kernel config?
Regards,
Kurt
_______________________________________________
Socketcan-core mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/socketcan-core
