This patch disables the one shot mode, until the driver has been fixed and tested to support it.
> I'm quite sure I've seen a situation where msg_obj 17 "seemed" to be > pending, while msg_obj 18 and 19 already have been transmitted. But > in that case, I enabled ONESHOT for the can interface, which enables > the DA mode (automatic retransmission is disabled). Reported-by: Jan Altenberg <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]> Cc: Bhupesh Sharma <[email protected]> --- drivers/net/can/c_can/c_can.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 110eda0..2040959 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -1112,8 +1112,7 @@ struct net_device *alloc_c_can_dev(void) priv->can.bittiming_const = &c_can_bittiming_const; priv->can.do_set_mode = c_can_set_mode; priv->can.do_get_berr_counter = c_can_get_berr_counter; - priv->can.ctrlmode_supported = CAN_CTRLMODE_ONE_SHOT | - CAN_CTRLMODE_LOOPBACK | + priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_BERR_REPORTING; -- 1.7.2.3 _______________________________________________ Socketcan-core mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-core
