This patch fixes the check in the probe function whether a IRQ was supplied to the driver. The original driver check the irq "struct resource *" against <= 0. Use "platform_get_irq" instead.
Signed-off-by: Marc Kleine-Budde <[email protected]> Cc: Bhupesh Sharma <[email protected]> --- drivers/net/can/c_can/c_can_platform.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index e629b96..cc90824 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -73,7 +73,8 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) void __iomem *addr; struct net_device *dev; struct c_can_priv *priv; - struct resource *mem, *irq; + struct resource *mem; + int irq; #ifdef CONFIG_HAVE_CLK struct clk *clk; @@ -88,8 +89,8 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) /* get the platform data */ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!mem || (irq <= 0)) { + irq = platform_get_irq(pdev, 0); + if (!mem || irq <= 0) { ret = -ENODEV; goto exit_free_clk; } @@ -117,7 +118,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) priv = netdev_priv(dev); - dev->irq = irq->start; + dev->irq = irq; priv->regs = addr; #ifdef CONFIG_HAVE_CLK priv->can.clock.freq = clk_get_rate(clk); -- 1.7.2.3 _______________________________________________ Socketcan-core mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-core
