From: Marc Kleine-Budde <[email protected]> Date: Mon, 6 Jun 2011 15:42:49 +0200
> Hello, > > this patch series add support for the at91_can core on the upcoming > at91sam9x5 SOC series. > > The original at91_can driver supports the at91sam9263 which has 16 > mailboxes, but the CAN core on the at91sam9x5 has only 8. Most constants > used in the RX and TX path are derived from the number of mailboxes. > > This patch series changes the driver from a static, compile time setup > of the mailboxes to a dynamic one. Patches 1-4 clean up the driver, 5+6 > simplify the usage of the constants, patch 7 converts all derived constants > into functions. Patch 8 will add id_table support to the driver then all > remaining constants are converted into functions using the run time > selected mailbox constants. The next patch (9) takes care about an > at91sam9263 specific errata fix. Patch 10 and 11 will finally add supoprt > for the at91sam9x5 SOC. > > This patch series applies to current net-next-2.6/master and has been tested > on a sam9263 and sam9x5ek. > (Allthough, the sam9x5 support is not mainline yet). > > please review and consider to apply, > Marc > > The following changes since commit e3cc055c18ab575291acf0af7622a2e97c4728fa: > > include/net: Remove unnecessary semicolons (2011-06-05 14:33:40 -0700) > > are available in the git repository at: > git://git.pengutronix.de/git/mkl/linux-2.6.git can/at91-sam9x5 Pulled, t hanks Marc. _______________________________________________ Socketcan-core mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-core
