On 09/30/2010 11:40 AM, Ewgenij Sokolovski wrote: > Hello, list. I am a newbie to the CAN sockets. I worked a time with virtual > CAN sockets and it worked well. Now, I tried to test my software with a real > can interface. I have a car PC with a Kvaser PCIcanx II HS/HS card installed > on it. A Debian Lenny system is running on it. However, I installed a new > kernel version 2.6.32 in order to work with socketCans. > > My problem is that I cannot get the can-interface of my Kvaser card to show > up. I loaded the kvaser_pci modul with modprobe. However, when I type in > > ip link set can0 type kvaser_pci > > or > > ip link set can0 type can > > I get the message "cannot find device can0". What am I doing wrong???
Do you find any device related messages in the kernel log e.g.: "xilinx version=%d number of channels=%d"? If not, the device was maybe not recognized. What PCI device and vendor id does your kvaser_pci device have? Wolfgang. _______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
