On 11/14/2010 08:14 PM, Willy Lambert wrote: > At the moment I have : > > r...@alpha:/opt/ard# ip -d -s link show can0 >> 17: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UNKNOWN >> qlen 10 >> link/can >> can state ERROR-ACTIVE restart-ms 10000 >> bitrate 500000 sample-point 0.875 >> tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1 >> sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1 >> clock 8000000 >> re-started bus-errors arbit-lost error-warn error-pass bus-off >> 0 0 0 0 0 0 >> RX: bytes packets errors dropped overrun mcast >> 0 0 0 0 0 0 >> TX: bytes packets errors dropped carrier collsns >> 0 0 0 0 0 0 >> > > > > candump does not show anything !
What does "cat /proc/interrupts" show? Are you sure you are using the correct interrupt numbers? Wolfgang. _______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
