Hi All! My first time that I work with CAN. The corresponding modules are enabled in the kernel. CAN0 device is not created. I find no indication in the log.
Does anyone have an idea. Thanks in advance Jochen system arm kirkwood ubuntu 9.04 kernel 2.6.35.7 # modprobe can # modprobe can_dev # modprobe can_raw # modprobe mcp251x # lsmod Module Size Used by mcp251x 8936 0 can_raw 5631 0 can_dev 7512 1 mcp251x can 21670 1 can_raw ipv6 269969 16 lm75 3494 0 hwmon 1547 1 lm75 sg 17106 0 hmac 2559 0 sha1_generic 1861 0 mv_cesa 9494 0 #dmesg | fgrep -i spi [ 0.243226] bus: 'spi': registered [ 0.243236] device class 'spi_master': registering [ 0.245452] Registering platform device 'orion_spi.0'. Parent at platform [ 0.245464] device: 'orion_spi.0': device_add [ 0.245482] bus: 'platform': add device orion_spi.0 [ 0.641819] bus: 'platform': add driver spi_gpio [ 0.641949] bus: 'platform': remove driver spi_gpio [ 0.642059] driver: 'spi_gpio': driver_release [ 0.642143] bus: 'platform': add driver orion_spi [ 0.642171] bus: 'platform': driver_probe_device: matched device orion_spi.0 with driver orion_spi [ 0.642186] bus: 'platform': really_probe: probing driver orion_spi with device orion_spi.0 [ 0.642216] device: 'spi0': device_add [ 0.642353] orion_spi orion_spi.0: registered master spi0 [ 0.642369] orion_spi orion_spi.0: cs7 >= max 1 [ 0.646922] driver: 'orion_spi.0': driver_bound: bound to device 'orion_spi' [ 0.646934] bus: 'platform': really_probe: bound device orion_spi.0 to driver orion_spi [ 0.647063] device class 'spidev': registering [ 0.647185] bus: 'spi': add driver spidev [ 60.261929] bus: 'spi': add driver mcp251x #dmesg | fgrep -i can [ 44.168787] can: controller area network core (rev 20090105 abi 8) [ 46.963810] CAN device driver interface [ 51.985386] can: raw protocol (rev 20090105)
_______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
