On 02/18/2011 11:19 PM, Joseph Kubicky wrote: > The message rate is low (about 25 frames/s). I've stopped all periodic > frames and just sent single frames manually (from the Kvaser software) and I > still get the same error frame after each [correct] reception.
Yes, and you seem to receive all messages correctly, without misses, I mean!? > Here's the output of that command: > > root:/> ip -d -s link show can0 > 2: can0: <NOARP,UP,LOWER_UP,40000> mtu 16 qdisc pfifo_fast state UNKNOWN > qlen 10 > link/[280] > can state STOPPED restart-ms 0 > bitrate 500000 sample-point 0.800 > tq 400 prop-seg 1 phase-seg1 2 phase-seg2 1 sjw 1 > bfin_can: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 4..1024 brp-inc 1 > clock 125000000 > re-started bus-errors arbit-lost error-warn error-pass bus-off > 0 0 0 0 0 0 > RX: bytes packets errors dropped overrun mcast > 20342390 2565939 1282969 0 1282969 0 It seems, that you get an overrun error for every second event. Wolfgang. _______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
