On 11/28/2011 05:06 PM, Oliver Hartkopp wrote: > >>> ... using a reasonable default for bcr of 0x40. But you may need to >>> provide better values for cir, bcr and cor. >>> >> >> OMG, sorry that I was bothering You but You are absolutely right and with >> Your >> statement You brought be back on track and You made my day. Thank You !!!!!! >> >> I just took the values for cpu and bus I was using in my lincan driver and >> funny >> enough now it's working absolutely perfect. >> >> Module: modprobe cc770_isa irq=0xa port=0x384 indirect=1 cir=0x61 bcr=0x4A >> >> Was just sending 50000 telegrams, perfect and no problem at all. >> >> Thanks a lot again!!!! >> > > > This looks like a Tested-by :-)
Wolfgang, I just sent out v4. Any chance to give this patch a try? It would be best to use a recent kernel version but I could also adapt the patch to your kernel version, 2.6.39, I think!? As you are using a CC770 chip, I'm especially interested in the relevant kernel log (dmesg) and "ip -d -s link show". Thanks, Wolfgang. _______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
