On 18-Jun-07, at 1:53 PM, Mike Tancsa wrote:
> Got my first 5501 today and just starting to look at it! So far so
> good. Quite a speedy bootup compared to the 45xx and even the
> 4801. I added the vr interface to our nanobsd flash, and it booted
> up without issue.
I should probably share that NetBSD -current (and the upcoming NetBSD
4.0 release) will support the net5501 as well. A dmesg follows.
Cheers,
Jared
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.20 (GENERIC) #16: Sun Jun 17 15:58:55 EDT 2007
[EMAIL PROTECTED]:/Users/jmcneill/
NetBSD/src/sys/arch/i386/compile/obj/GENERIC
total memory = 511 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 492 MB
timecounter: Timecounters tick every 10.000 msec
userconf: loading settings from boot plist
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfac40
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Geode LX (586-class), 499.93 MHz, id 0x5a2
cpu0: features 88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP>
cpu0: features 88a93d<PGE,CMOV,MPC,MMX>
cpu0: "Geode(TM) Integrated Processor by AMD PCS"
cpu0: I-cache 64 KB 32B/line 16-way, D-cache 64 KB 32B/line 16-way
cpu0: L2 cache 128 KB 32B/line 4-way
cpu0: ITLB 16 4 KB entries fully associative
cpu0: DTLB 16 4 KB entries fully associative
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 1 function 0
pchb0: Advanced Micro Devices Geode LX Host-PCI Bridge (rev. 0x31)
glxsb0 at pci0 dev 1 function 2: RNG AES
vr0 at pci0 dev 6 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:00:24:c8:b3:80
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0034, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1 at pci0 dev 7 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr1: interrupting at irq 5
vr1: Ethernet address: 00:00:24:c8:b3:81
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0002c6, model 0x0034, rev. 3
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr2 at pci0 dev 8 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr2: interrupting at irq 9
vr2: Ethernet address: 00:00:24:c8:b3:82
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface
ukphy2: OUI 0x0002c6, model 0x0034, rev. 3
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr3 at pci0 dev 9 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr3: interrupting at irq 12
vr3: Ethernet address: 00:00:24:c8:b3:83
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface
ukphy3: OUI 0x0002c6, model 0x0034, rev. 3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 20 function 0
pcib0: Advanced Micro Devices CS5536 PCI-ISA Bridge (rev. 0x03)
viaide0 at pci0 dev 20 function 2
viaide0: Advanced Micro Devices CS5536 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel ignored (disabled)
ohci0 at pci0 dev 20 function 4: Advanced Micro Devices CS5536 OHCI
USB Controller (rev. 0x02)
ohci0: interrupting at irq 15
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 20 function 5: Advanced Micro Devices CS5536 EHCI
USB Controller (rev. 0x02)
ehci0: interrupting at irq 15
ehci0: pre-2.0 USB rev
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43: AT Timer
nsclpcsio0 at isa0 port 0x2e-0x2f: NSC PC87366 rev. 9
nsclpcsio0: GPIO at 0x6600
nsclpcsio0: TMS at 0x6640
gpio0 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <SanDisk SDCFB-512>
wd0: drive supports 4-sector PIO transfers, LBA addressing
wd0: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
wd0(viaide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
_______________________________________________
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech
