On Wednesday, September 19, 2007 at 08:40:50 -0700, Vincent Li wrote: <snip> >Then I typed reboot at prompt, it reboot and hangs here: >------- >boot> >booting hd0a:/bsd:5567348+871228 [52+283664+263996]=0x6a9ba4 >entry point at 0x200120 >--------- > >does this mean that the bootloader boot OpenBSD from address 0x200120 and >could not find the boot partition? do I have a faulty CF because of >"pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20"?
Looks like the system isn't using the serial console. Please try to enter boot> set tty com0 boot> set stty 19200 at the boot prompt and see how it goes. If this works, put these lines in /etc/boot.conf. Mauriace _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech