Hello,
I'm having trouble with a lan1641 quad-port card when plugged into a
PCI-X or PCI-express with PCI-X riser port. My OS is OpenBSD 4.2 and
the motherboard is an Intel S3000AHV. The OS crashes when I attempt to
run "ifconfig -a". When I plug the same card into a normal PCI slot it
responds normally. The lan1621 dual-port cards work fine in either
slot. dmesg output is below showing the sisX devices. It sounds like
an interrupt assignment issue to me. Does anyone have any ideas on how
to get this to work?
Thanks in advance!
Bob
# dmesg
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
cpu0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz ("GenuineIntel" 686-class)
1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS
,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2143473664 (2044MB)
avail mem = 2065018880 (1969MB)
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/11/06, SMBIOS rev. 2.4 @
0x7fbf4000 (43 entries)
bios0: vendor Intel Corporation version
"S3000.86B.02.00.0044.071120071047" date 07/11/2007
bios0: Intel S3000AHLX
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0x9000
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "TI PCI2250 PCI-PCI" rev 0x02
pci3 at ppb2 bus 3
sis0 at pci3 dev 0 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 9, address 00:00:24:c9:42:18
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci3 dev 1 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 10, address 00:00:24:c9:42:19
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci3 dev 2 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 11, address 00:00:24:c9:42:1a
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
sis3 at pci3 dev 3 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 11, address 00:00:24:c9:42:1b
nsphyter3 at sis3 phy 0: DP83815 10/100 PHY, rev. 1
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: irq
10, address 00:15:17:49:ce:c7
"Intel 82573E AMT" rev 0x03 at pci5 dev 0 function 3 not configured
"Intel 82573E KCS (Active Management)" rev 0x03 at pci5 dev 0 function 4
not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 9
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 4 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em1 at pci6 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq
10, address 00:15:17:49:ce:c8
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, chann
el 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel
1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 1 drive 0: <ST3400620AS>
wd0: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 11
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6d100 rev 0x69
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fbed netmask ffed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
