On Wed, 13 Feb 2008, Kim Weilie wrote: > Hi, > > >> I'm considering using a Soekris system to secure my wireless at home >> with OpenVPN. Most likely i'll only run OpenBSD with OpenVPN on it. >> There will be 2 wireless notebooks using the VPN and my Internet >> connection is 24Mbit/s down and 2Mbit/s up. > > I tested OpenBSD with Soekris and couldn't discover bottleneck > capacities over internet. But I never had the chance to send with more > than 8MBit/s. > But to provide must power, it's possible to use the GeodeLXs' 50Mbit/s > pre-processor. You only have to enable the AES-128-CBC algorithm in > your openvpn-config; e.g. cipher AES-128-CBC >
Of course, I spoke too soon. Looks like the issue *was* with the Linux driver. There are reports of getting the HiFN driver to work under linux. Here's link (in case you ever decide to go the linux route). http://ocf-linux.sourceforge.net/ OpenBSD *should* be good. -Andy _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
