K K wrote: > On 6/4/08, Carlos Castro <[EMAIL PROTECTED]> wrote: >> Does anyone know of a 3rd party vendor who might have a 19" rack mount case >> for the net5501 boards? > > We bought the Kerberos.si 19" rack case, the one shown at https://kd85.com/ > > The case works great, is sturdier and more professional than the > standard lime sherbert colored case. I've never liked the barrel > connector for power, with this case the external power connection is a > standard 2-pin laptop power cable. > > My only real complaint about all the cases (Soekris and 3rd party) is, > none make the CF externally accessible, nor are trivially modifiable > (e.g. with a nibbler) to expose the card.
You could always get good with a dremel tool ;) I've done some modifications to the original case to get certain pci cards to fit (the Rhino 8 port analog card pairs up nicely but requires two cuts with the dremel to fit right) Darrick -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com http://www.djhsolutions.com/wiki _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech