In message <98c005e13f5c664f869f1e6b0766301e0308c...@wp201e001.au.oceania.intra
net>, "Rhys Frederick" writes:
>Hi all,
>
>Has anyone had any experience using a Promise TX4 Sata card in the
>5501's PCI slot? I'm looking to connect a bunch of SATA drives to a
>5501. I realise the system is going to be limited by the 33Mhz PCI bus
>but wondering if anyone hass used it successfully. I'll probably be
>running the system with FreeBSD (M0n0 1.3 based distro) and FreeBSD
>seems to have good support for the promise-based cards.

It does not work for me.

I belive the problem is that the PLL calibration code in the TX4's
bios-rom does not run.

I have TX4 card waiting for Soren whenever he cares to pick it up.

-- 
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
p...@freebsd.org         | TCP/IP since RFC 956
FreeBSD committer       | BSD since 4.3-tahoe    
Never attribute to malice what can adequately be explained by incompetence.
_______________________________________________
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech

Reply via email to