just below the: 0512 Mbyte Memory CPU Geode LX 500 Mhz
is detected drives listed, the bios does not detect the drive at all, are you sure that you've connected it correctly, and that the drive works ? loppefaaret On Wed, Oct 27, 2010 at 1:54 AM, Randy Bush <ra...@psg.com> wrote: > I used to run my 5501 off SATA, but switched to CF a couple of years > ago. The CF borked and I want to boot off the old SATA. So I plugged > it it, it spins up, but I can not seem to boot off it. > > How to debug? > > randy > > --- > > POST: 012345689bcefghips1234ajklnopqr,,,tvwxy > > > comBIOS ver. 1.33c 20080626 Copyright (C) 2000-2008 Soekris Engineering. > > net5501 > > 0512 Mbyte Memory CPU Geode LX 500 Mhz > > > Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int > ------------------------------------------------------------------- > 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 > 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 > 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 > 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 > 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 > 0:17:0 168C 0013 02000001 0116 0290 08 40 00 A0010000 00000000 15 > 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 > 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 > 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0020000 00000000 07 > 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0021000 00000000 07 > > 1 Seconds to automatic boot. Press Ctrl-P for entering Monitor. > > Intel UNDI, PXE-2.0 (build 082) > Copyright (C) 1997,1998,1999 Intel Corporation > VIA Rhine III Management Adapter v2.43 (2005/12/15) > PXE-E61: Media test failure, check cable > > PXE-M0F: Exiting Intel PXE ROM. > > No Boot device available, enter monitor. > > > comBIOS Monitor. Press ? for help. > > > show > > ConSpeed = 9600 > ConLock = Enabled > ConMute = Disabled > BIOSentry = Enabled > PCIROMS = Enabled > PXEBoot = Disabled > FLASH = Secondary > BootDelay = 5 > FastBoot = Disabled > BootPartition = Disabled > BootDrive = 80 81 F0 FF > ShowPCI = Enabled > Reset = Hard > CpuSpeed = Default > > > boot 80 > > No Boot device available, enter monitor. > > > comBIOS Monitor. Press ? for help. > > > boot 81 > > No Boot device available, enter monitor. > > > comBIOS Monitor. Press ? for help. > > > > _______________________________________________ > Soekris-tech mailing list > Soekris-tech@lists.soekris.com > http://lists.soekris.com/mailman/listinfo/soekris-tech >
_______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
