Enrico Valsecchi schrieb: > Hello, > > I have install Endian Firewall distro on Hard drive > by normal P.C. and after I have modify grub with these settings: > > > Now, > when I plug hard drive into Net6501, system hags on "Grub stage 2". > > I have try with IpCop distro, with same setting, and boot success, > output on serial are good and system boot success. > Means that not are Hard Disk compatibility problem. > > This is a grub setting: > > timeout 3 > #foreground = 16064e > #background = ffffff > serial --unit=0 --speed=38400 --word=8 --parity=no --stop=1 > terminal --timeout=0 --dumb serial console > hiddenmenu > > title EFW (2.6.32.43-57.e43.i586) > root (hd0,0) > kernel /boot/vmlinuz-2.6.32.43-57.e43.i586 root=/dev/hda1 panic=10 > quiet ro console=tty0,38400n8 console=ttyS0,38400n8 > initrd /boot/initrd-2.6.32.43-57.e43.i586.img > savedefault > > ----------------- > > I have try with "hidden menu", following this docs: > http://wiki.soekris.info/Pxelinux_hangs_if_serial_not_connected > > But result are same: grub hangs. > > > Someone has the solution? > > Many thanks, > Hi, have you installed grub into right MBR? Was your disk (here hd0) selectet as "hdX"?
Eg. grub> root (hdX,0) grub> setup (hdX) -- Regards *WOL*fgang *S*chricker _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
