Hi guys, I got myself a couple of the 4501's to experiment with (AMD ELAN SC520).
I'm however having a bit of a problem... * I installed Debian 6.0 on a 8Gb CF * I changed the kernel to i486 from i686* I shoved the CF into the Soekris & booted with a serial connected to my laptop
I get the grub screen, I get a loading kernel, I get the loading ramdisk. But the problem is after that, it just appears to hang.I have the console and everything setup 100%, if I put the CF into a Atomit boots 100% fine.
I tried the Debian i386 kernel on the netinst iso too to no avail. I then tried the openwrt kernel aswell. All exactly the same issue.I tried to change some of the bios settings also to no avail. (ConLock, fastboot ... etc) I have the speed now set to 57600 and have tried everything below this.
I then tried booting off our netboot server, it loads a gPXE chain loader, but hangs before gPXE runs.
I then tried to PXE all the above kernels, same problem. It hangs straight after loading the kernel.
I've tried kernel 2.4 all the way up to 3.2 from multiple sites/vendors stating to support Soekris. The ONLY image which works is the M0n0wall
firewall image, this boots perfectly and loads 100%. I'm a bit lost if anyone can maybe tell me what I've done wrong? Regards Nigel
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech