Hello, I am new to the Soekris. I try to install FreeBSD on Soekris 4801-48 with CF memory (8GB). I followed excellent guide for PXE booting FreeBSD 9.x: http://freebsd.so14k.com/freebsd9_pxe.shtml
To communicate with Soekris I use terminal Minicom (19200baud and 8N1) on PC with FreeBSD 9.0. I got the following output on terminal: > boot f0 aC DP83815/DP83816 Fast Ethernet UNDI, v1.03 npyright (C) 2002, 2003 National Semiconductor Corporation rl rights reserved. e te-boot eXecution Environment PXE-2.0 (build 082) npyright (C) 1997-2000 Intel Corporation i :IENT MAC ADDR: 00 00 24 CF D8 F8 sIENT IP: 192.168.1.45 MASK: 255.255.255.0 DHCP IP: 192.168.1.10 eTEWAY IP: 192.168.1.10 lE Loader 1.00 o silding the boot loader arguments nlocating the loader and the BTX oarting the BTX loader C I see that in the end of printout cursor jumps to the line just next to >boot f0 runs forwards and backwards several times than stops and terminal hangs. Port Eth0 shows activity, LEDs are on but there is no answer for ping and ssh. Is something wrong with terminal parameters? I use 19200baud 8N1 and VT102 or ANSI, is that ok ? Or boot loader BTX is working badly. I would appreciate your advice and help. Jacek _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech