I purchased a net 6501-30 autumn 2011 from Soekris Europe. It's been working nicely for me after bios with usb boot code was in place. I'm running ComBIOS 1.41c and boot OpenBSD from a low profile USB stick.
However this is not a boot problem, it's a board start problem. Some time ago, after power recycling, which always went well before, the box didn't boot up and only the green power led and the red error led was lit. I then tried to press the reset button and the box continued to boot as normally. Because of occasional need for power cycling this happened a couple more times, then the other day after power cycling it wouldn't start anymore at all. And now pressing the reset button does nothing, except the four interface leds flash a fragment of a moment, and then back to only green power led and red error led lit. It stops before ComBIOS, there are no output to the serial console whatsoever (and I have had no problems getting the serial console to work before, so that's not it). So no disk problem or such, the box don't even get to POST. Where do I proceed from here? Any thoughts? Grateful for any ideas... -- Eivind Eide "ONLY THOSE WHO ATTEMPT THE IMPOSSIBLE WILL ACHIEVE THE ABSURD" - Oceania Association of Autonomous Astronauts
_______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech