My mistake: For Softimage version 2012 and 2013, fedora 14 would be a better option. Cheers.
From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Chris Chia Sent: Friday, May 18, 2012 6:44 AM To: <softimage@listproc.autodesk.com> Subject: Re: XSI on linux For Softimage version 2012, i would recommend Fedora 9. For Softimage 2013, fedora 14 would be a better option. On 18 May, 2012, at 1:37 AM, "Sue Jang" <suejan...@gmail.com<mailto:suejan...@gmail.com>> wrote: Hi, Thank you for all the replies- I am the guinea pig this time but hopefully this will help them integrate XSI better for the future reference! the spec on the surface... 2.6.32.26.165 fedora12 We are running XSI 2012 SP1. Thank you for your reply Chris Chia- I suppose I turned to the list where I felt I might get some immediate reply.. Will also get them to contact the Softimage support. Thank you! On Thu, May 17, 2012 at 1:21 PM, Chris Chia <chris.c...@autodesk.com<mailto:chris.c...@autodesk.com>> wrote: Yup Sandy, you are a perfect example. This is because Softimage has been tested heavily on Fedora 14. Regards, Chris Chia Softimage QA Analyst On 18 May, 2012, at 1:13 AM, "Sandy Sutherland" <sandy.sutherl...@triggerfish.co.za<mailto:sandy.sutherl...@triggerfish.co.za><mailto:sandy.sutherl...@triggerfish.co.za<mailto:sandy.sutherl...@triggerfish.co.za>>> wrote: We run Softimage on FC 14 on our farm here and it works very well. S. _____________________________ Sandy Sutherland Technical Supervisor sandy.sutherl...@triggerfish.co.za<mailto:sandy.sutherl...@triggerfish.co.za><mailto:sandy.sutherl...@triggerfish.co.za<mailto:sandy.sutherl...@triggerfish.co.za>> _____________________________ ________________________________ From: softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com><mailto:softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>> [softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com><mailto:softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>>] on behalf of Sue Jang [suejan...@gmail.com<mailto:suejan...@gmail.com><mailto:suejan...@gmail.com<mailto:suejan...@gmail.com>>] Sent: 17 May 2012 19:03 To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com><mailto:softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>> Subject: XSI on linux Hi list, I'm currently helping out at a linux based company. they installed few seats of XSI over here. (XSI+Arnold+linux) I must say though, that the performance of XSI is rather embarrassing. To a degree where the crash is frequent every 5 to 10 minutes. (even for a simple lighting task.) I've worked at few other linux places where XSI worked beautifully. So I know that this is not Linux related issue in this case- Can someone kindly point me or forward me any info - even helpful XSI/Linux thread on the autodesk site? (besides contacting autodesk support) Any information would be greatly appreciated- Thanks in advance! S
<<attachment: winmail.dat>>
