Thank you, i have solved the problem. I was working 100mb half/auto, but my switch was 100mb full.
just a few adjustments and evrth is fine! rgds! Quoting Junmin Bai <[EMAIL PROTECTED]>: > 1. run */ndd /dev/hme adv_autoneg_cap/* to check whether the auto > negotiation is enabled. > 2. run /*ndd /dev/hme adv_100fdx_cap* /to check whether the 100mbps full > duplex is enabled. > > If all those settings are ok , go to sunsolve.sun.com to check whether > you miss certain patch. > Also check /var/adm/messages to get any warning or error message. > At last, if all these wouldn't help, switch your machine to OK prompt > and run */test net/* to test the on-board Ethernet controller. Or set* > setenv diag-switch? true *at OK prompt and then reboot to run full > hardware diagnostic. > > Good luck! > Junmin > > Fernando Machado Jr. wrote: > > > Hi, folks! > > > > When I try to grab any data from my sun server, the speed is > > *amazing*, almost stopped. What could cause this? I'm using Solaris 8 > > sparc. > > > > RGDS! > > > > > _______________________________________________ > Solaris-Users mailing list > [EMAIL PROTECTED] > http://www.filibeto.org/mailman/listinfo/solaris-users > /J. Fernando L. Machado Jr. /Universidade Federal do Rio Grande do Sul /Departamento de Inform�tica /Lab 212/230 ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ Solaris-Users mailing list [EMAIL PROTECTED] http://www.filibeto.org/mailman/listinfo/solaris-users
