List,
I have a Sun Fire V20z server with a RAID 1 array configured using the
onboard LSI mpt card. It appears that after every shutdown/reboot, on
bootup, the system gives me a messaage about volume 0 is
"enabled||resyncing||degraded". I see the light on the drive to the right
(drive 1) is lit, so I know this must be the drive that is resyncing.
raidctl output is as follows:
[r...@fire1 ~]#raidctl -l
Controller: 1
Volume:c1t0d0
Disk: 0.0.0
Disk: 0.1.0
[r...@fire1 ~]#raidctl -l c1t0d0
Volume Size Stripe Status Cache RAID
Sub Size Level
Disk
----------------------------------------------------------------
c1t0d0 68.2G N/A SYNC OFF RAID1
0.0.0 68.2G GOOD
0.1.0 68.2G GOOD
[r...@fire1 ~]#
[r...@fire1 ~]#cat /etc/release
Solaris 10 10/08 s10x_u6wos_07b X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 27 October 2008
It shows that both physical disks are good, but I don't know why it keeps
doing this. I am not sure what else to check.
And yes, I did wait for it to finish resyncing before shutting down again.
Any and all help is apreciated.
- Ed
_______________________________________________
Solaris-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/solaris-users
