Stoyan,
I final got the chance to try what you recommended and
received the same error message again. But I did notice that after I
get the fast data access mmu missing error if I rerun boot disk
/flash-update-Ultra60-latest(or 09) I get a Trap 3e error message. I
experience the issue with both boxes. I dont think i am missing a step
as I am have read over the documentation a bunch. You download the
patch, copy the flash-update files (cp flash*latest) to /,chmod 755
/flash-update* heck I have even tried a 777 just to see what
happens.This has got me stumped. At this point I am open to try
anything as I need both box at a higher patch level to run linux and
the ultra 60 to run 450mhz processors.
On Mon, Aug 3, 2009 at 5:50 AM, Stoyan
Angelov<[email protected]> wrote:
> Bernie Clear wrote:
>>
>> I have an Ultra 60 and a Ultra 10 both running Solaris 10 with
>> openboot 3.11 . I would like to patch both to openboot 3.27 or higher.
>> I have downloaded the latest prom updates from sunsolve. After coping
>> the files to the root directory,shutting down the systems, moving the
>> jumper and restarting. I type boot disk /flash-update-Ultra60-latest I
>> get the following errors: can't read or open
>> /flash-update-Ultra60-latest Fast Data access mmu on both machines(of
>> course on the ultra10 I type boot disk /flash-update-Ultra510-latest.
>>
>>
>> I have done some research and found hints to do the following:
>> ok setenv auto-boot? false
>> ok reset-all and then when ok show sup try boot the device again.That
>> didn't seem to fix the issue. Anyone have any idea of what I should
>> try next?
>>
>> p.s. I have no issue booting into Solaris 10 just running the flash.
>
> hi Bernie,
>
> for the ultra60 you can try copying the binary file from the patch
> directory: flash-update-Ultra60-09 to "/" as flash-update-Ultra60-latest is
> in fact a symlink to it (or you can check that /flash-update-Ultra60-latest
> is indeed the correct binary file). then try booting again and see if it
> works:
>
> $file /flash-update-Ultra60-09
> flash-update-Ultra60-09: ELF 32-bit MSB executable SPARC32PLUS
> Version 1, V8+ Required, statically linked, stripped
>
> $digest -a md5 /flash-update-Ultra60-09
> 96d865469f2a7107f5d43713f5d974e9
>
> boot disk /flash-update-Ultra60-09
>
> if it works than do the same for the ultra 10.
>
> hope this helps.
>
>
> greetings,
>
> Stoyan Angelov
>
>
> _______________________________________________
> Solaris-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/solaris-users
>
_______________________________________________
Solaris-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/solaris-users
