Bonjour a tous, j'ai encore quelques probleme pour configuere mon raid materiel :
la carte Qlogic semble fonctionelle :
/
Apr 14 13:08:24 baobab qla2300: [ID 818750 kern.notice] QLogic Fibre Channel Driver v4.15.02 Instance: 0
Apr 14 13:08:24 baobab pcplusmp: [ID 637496 kern.info] pcplusmp: pci1077,9 (qla2300) instance 0 vector 0x1f ioapic 0x6 intin 0x3 is bound to cpu 1
Apr 14 13:08:24 baobab qla2300: [ID 993398 kern.info] hba0: Fibre Channel Loop is Down (8013)
Apr 14 13:08:25 baobab qla2300: [ID 736385 kern.info] hba0: Fibre Channel Loop is Up (8014)
Apr 14 13:08:25 baobab qla2300: [ID 491635 kern.notice] hba0: Firmware v3.3.1 (ipx)
Apr 14 13:08:25 baobab qla2300: [ID 568177 kern.info] hba0-adapter-node-name="200000e08b1bc513";
Apr 14 13:08:25 baobab qla2300: [ID 562076 kern.info] hba0-adapter-port-name="210000e08b1bc513";
Apr 14 13:08:25 baobab qla2300: [ID 720712 kern.info] hba0-adapter-port-id="0000e8";
Apr 14 13:08:25 baobab qla2300: [ID 564312 kern.info] hba0-SCSI-target-id-0-fibre-channel-node-name="20000004d96031ec";
Apr 14 13:08:25 baobab qla2300: [ID 558211 kern.info] hba0-SCSI-target-id-0-fibre-channel-port-name="21000004d96031ec";
Apr 14 13:08:25 baobab qla2300: [ID 868424 kern.info] hba0-SCSI-target-id-0-port-id="0000ef";
Apr 14 13:08:25 baobab qla2300: [ID 157811 kern.info] hba0-SCSI-target-id-0-lun-1-enable;
Apr 14 13:08:25 baobab qla2300: [ID 157811 kern.info] hba0-SCSI-target-id-0-lun-0-enable;
Apr 14 13:08:25 baobab pci_pci: [ID 370704 kern.info] PCI-device: pci1077,[EMAIL PROTECTED], qla23000
Apr 14 13:08:25 baobab genunix: [ID 936769 kern.info] qla23000 is /[EMAIL PROTECTED],0/pci1022,[EMAIL PROTECTED]/pci1077,[EMAIL PROTECTED]
Apr 14 13:08:51 baobab scsi: [ID 193665 kern.info] sd18 at qla23000: target 0 lun 0
Apr 14 13:08:55 baobab scsi: [ID 193665 kern.info] sd17 at qla23000: target 0 lun/ /1
/
et les deux nouveau disque sont c2t0d0 et c2t0d1, seulement impossible de les formater :
format bloque indefiniment sur c2t0d0 et pour c2t0d1 l'autoconfiguration ne marche pas du tout :
/format c2t0d1 Mode sense page(3) reports nsect value as 480, adjusting it to -273 Error: can't open selected disk '/dev/rdsk/c2t0d1p0'.
format> disk
AVAILABLE DISK SELECTIONS: 0. c2t0d1 <drive type unknown> /[EMAIL PROTECTED],0/pci1022,[EMAIL PROTECTED]/pci1077,[EMAIL PROTECTED]/[EMAIL PROTECTED],1 Specify disk (enter its number)[0]: 0
AVAILABLE DRIVE TYPES:
0. Auto configure
1. other
Specify disk type (enter its number): 0
Mode sense page(3) reports nsect value as 480, adjusting it to -273
Error: can't open selected disk '/dev/rdsk/c2t0d1p0'.
Auto configure failed/et je ne sais pas ou trouver les informations pour le configurer manuellement.
Si quelqu'un a une idee ...
Merci !
--
Sylvain Cousquer
Computer Vision Group Engineer
Institut Pasteur Korea
Tel : +82-2-3299-0262
_______________________________________________ Solaris_fr liste de diffusion en français pour Solaris, sur toutes architectures Solaris_fr@x86.sun.com http://x86.sun.com/mailman/listinfo/solaris_fr
