Hi Adrian, How is your setup of your system like? By right it shouldn't be an issue if we use different ports.
in fact, if the various zookeeper instance are running on a single machine, they have to be on different ports in order for it to work. Regards, Edwin On 1 October 2015 at 18:19, Adrian Liew <adrian.l...@avanade.com> wrote: > Hi all, > > The problem below was resolved by appropriately setting my server ip > addresses to have the following for each zoo.cfg: > > server.1=10.0.0.4:2888:3888 > server.2=10.0.0.5:2888:3888 > server.3=10.0.0.6:2888:3888 > > as opposed to the following: > > server.1=10.0.0.4:2888:3888 > server.2=10.0.0.5:2889:3889 > server.3=10.0.0.6:2890:3890 > > I am not sure why the above can be an issue (by right it should not), > however I followed the recommendations provided by Zookeeper administration > guide under RunningReplicatedZookeeper ( > https://zookeeper.apache.org/doc/r3.1.2/zookeeperStarted.html#sc_RunningReplicatedZooKeeper > ) > > Given that I am testing multiple servers in a mutiserver environment, it > will be safe to use 2888:3888 on each server rather than have different > ports. > > Regards, > Adrian > > From: Adrian Liew [mailto:adrian.l...@avanade.com] > Sent: Thursday, October 1, 2015 5:32 PM > To: solr-user@lucene.apache.org > Subject: Cannot connect to a zookeeper 3.4.6 instance via zkCli.cmd > > Hi there, > > Currently, I have setup an azure virtual network to connect my Zookeeper > clusters together with three Azure VMs. Each VM has an internal IP of > 10.0.0.4, 10.0.0.5 and 10.0.0.6. I have also setup Solr 5.3.0 which runs in > Solr Cloud mode connected to all three Zookeepers in an external ensemble > manner. > > I am able to connect to 10.0.0.4 and 10.0.0.6 via the zkCli.cmd after > starting the Zookeeper services. However for 10.0.0.5, I keep getting the > below error even if I started the zookeeper service. > > [cid:image001.png@01D0FC6E.BDC2D990] > > I have restarted 10.0.0.5 VM several times and still am unable to connect > to Zookeeper via zkCli.cmd. I have checked zoo.cfg (making sure ports, data > and logs are all set correctly) and myid to ensure they have the correct > configurations. > > The simple command line I used to connect to Zookeeper is zkCli.cmd > -server 10.0.0.5:2182 for example. > > Any ideas? > > Best regards, > > Adrian Liew | Consultant Application Developer > Avanade Malaysia Sdn. Bhd..| Consulting Services > (: Direct: +(603) 2382 5668 > È: +6010-2288030 > > >
