Hi Guys Here are some findings on my vaio after the info you all kindly supplied me...
1. I have just installed Fedora 11 Preview. Eva's sony-laptop-vaioz0.9 installed without a hitch. 2. I have the nvidia driver, Bernd's link, up and running. Interestingly I can't get the screen resolution to set to 1600x900. I tried with the nvidia-settings multiple times/multiple reboots and no luck. It says it's 1600x900-60Hz, but the screen is definitely looks like 1366x768 everything is larger than when running off the intel....very strange.... 3. I tried, and am now stuck with, the acpi=ht. This mod works to stop the machine resetting the stamina/speed LED, but I can't seem to get it to revert back to normal acpi running. I tried acpi=off, acpi=on, acpi=force and still my dmesg says I have acpi=ht.....I found a great description of all the acpi commands available for boot: http://www.columbia.edu/~ariel/acpi/acpi_howto.txt, but this seems to have no reset command??? Of course this means now my machine can't do the adaptive slowing of the processor or keep track of its temperature, I sure it is running hotter.... Bernd, I had a look at CRUX, not very in depth mind you, I was wondering on what you think is the main difference between CRUX and, say Fedora or Ubuntu??? What GUI does it run as default??? And I was hoping you could tell me your opinion on why its a good Linux OS.... Alexandre, I was hoping you might know of a way to reset the acpi to "normal" or default running mode. I have tow scripts that I am trying to get to work; 1) an nvidia that mv's the xorg.conf and sets the grub/menu.lst to have the kernel argument acpi=ht, and 2) an intel that mv's the xorg.conf to backup, ie no more xorg.conf and resets the acpi to normal operating....I'm stalled at the reset acpi point....otherwise it works... Thank you all again for the help, Chris On Mon, May 11, 2009 at 7:12 PM, Bernd Eggink <mono...@sudrala.de> wrote: > Johannes Kabisch schrieb: > >> Hi Bernd, >> >> nvidia works now with acpi=ht. >> I wonder why it works for you without any hacks. >> >> What Distro are you using, what Kernel, which nvidia-drivers? >> > > Hi Johannes, > > my machine is a VGN-Z21VN, the distro is Crux (http://crux.nu/) with icewm > and ROX filer, kernel 2.6.29.2. I installed the nvidia driver from > > http://www.nvidia.com/object/linux_display_ia32_180.51.html. > > I also tried the nv driver from xorg. Both worked, with the same > limitations (no backlight control). One difference was that the proprietary > nvidia driver replaced a couple of libraries on my system, which caused some > trouble later when I switched back to the intel driver. > > Greetings, > Bernd > > -- > Bernd Eggink > http://sudrala.de > > _______________________________________________ > Mailing list: > https://launchpad.net/~sony-vaio-z-series<https://launchpad.net/%7Esony-vaio-z-series> > Post to : sony-vaio-z-series@lists.launchpad.net > Unsubscribe : > https://launchpad.net/~sony-vaio-z-series<https://launchpad.net/%7Esony-vaio-z-series> > More help : https://help.launchpad.net/ListHelp >
_______________________________________________ Mailing list: https://launchpad.net/~sony-vaio-z-series Post to : sony-vaio-z-series@lists.launchpad.net Unsubscribe : https://launchpad.net/~sony-vaio-z-series More help : https://help.launchpad.net/ListHelp