Hi DrKarl, It is perfectly possible to install Linux after installing Windows 7. The Linux CD one should use for installing must simply have the correct drivers and programs installed for a software raid configuration. Perhaps you should try to find out if your CD already has that. If not, you'll need another one.. Good luck
Regards, Rutger 2010/12/5 DrKarl <[email protected]>: > Hi everybody, > I just got a brand new Vaio VPCZ13X5E with 8GB RAM, 512GB SSD. As you > know, it comes with 4 SSD in RAID 0. I couldn't partition the disk to less > than 250GB as there were some clusters in the middle of the drive. > I formatted again and reinstalled Windows 7, this time Ultimate > Edition 64 bits, in a 100GB partition. I'll try to install Snow Leopard and > Linux as well, but I know it won't be easy. > For Linux I would like to try to install Arch Linux, but if it becomes > too difficult I'll try something more mainstream like Debian or Ubuntu. > I boot from Arch Linux CD, and when I run /arch/setup and it's time to > setup the partitions, it finds 4 disks, that is, it doesn't detect RAID 0. > Does it mean that I should Install Linux First, then Windows and finally Mac > OS X? > Or is there a way to detect RAID 0 with a partition for Windows 7 from > Linux? > Thank You very much in advance!! > > "That which doesn't kill you makes you stronger" > Friedrich Wilhelm Nietzsche > > > _______________________________________________ > Mailing list: https://launchpad.net/~sony-vaio-z-series > Post to : [email protected] > Unsubscribe : https://launchpad.net/~sony-vaio-z-series > More help : https://help.launchpad.net/ListHelp > > _______________________________________________ Mailing list: https://launchpad.net/~sony-vaio-z-series Post to : [email protected] Unsubscribe : https://launchpad.net/~sony-vaio-z-series More help : https://help.launchpad.net/ListHelp
