Vick, Thanks for helping me with this. I guess worst case I still have a 3.2 kernel that has a working GobiSerial on it. When i need the PMD, i generally don't need the WWAN. So I guess I will boot to the 3.2 kernel when I need the WWAN and the 3.6 kernel when I need the PMD.
Thanks again. Maybe I'll try again when 3.6 goes stable. Rob On Sun, Sep 2, 2012 at 5:50 PM, vick <weasalan...@yahoo.com> wrote: > > >Finally, I just tried it in Winbloze and it connected right away, so the > hardware seems to be working any way. So if I just wait a bit it will try > to connect by itself? > > > > > The device itself should try and communicate with the gsm network but it > won't connect on it's own. > Did you try connecting with wvdial via ttyUSB1 rather than using network > manager? > > I'm not sure what could be causing this. If Network Manager sees the > device it must be querying the correct usb interface and it must be > responding ( I think they run some AT commands to check the device, etc). > I'm out of ideas. > > I believe the patches for the PMD should be compatible with the 3.5 kernel > so you might want to try that instead. Sorry. > > _______________________________________________ > Mailing list: https://launchpad.net/~sony-vaio-z-series > Post to : sony-vaio-z-series@lists.launchpad.net > Unsubscribe : https://launchpad.net/~sony-vaio-z-series > More help : https://help.launchpad.net/ListHelp >
_______________________________________________ Mailing list: https://launchpad.net/~sony-vaio-z-series Post to : sony-vaio-z-series@lists.launchpad.net Unsubscribe : https://launchpad.net/~sony-vaio-z-series More help : https://help.launchpad.net/ListHelp