On Wed, Oct 28, 2009 at 02:10:27AM +0000, Michael Lorenz wrote: > Module Name: src > Committed By: macallan > Date: Wed Oct 28 02:10:27 UTC 2009 > > Modified Files: > src/sys/dev/pci: files.pci > Added Files: > src/sys/dev/pci: pm2fb.c pm2reg.h > > Log Message: > A driver for the Permedia 2 graphics processor, so far it's been tested only > on sparc64 with a Sun PGX32 / TechSource Raptor GFX 8P > So far it accelerates block copies, rectangle fills and the cursor, it > supports the usual wsdisplay / vcons stuff. > TODO: > - character drawing by hardware so we don't need to map the framebuffer > - DDC2 support > - mode setting > This driver still relies on the firmware to set up graphics modes etc. so it > won't work on x86 ( or non-OpenFirmware for that matter ) unless you use the > VESA BIOS to set up graphics and pass the right properties ( width, height > etc. ) to the driver. For the same reason it will work only if it's the > OpenFirmware console.
Hi, These can also be found on alpha systems; I have one in my desktop at work (along with a MGA 2164W for dual-head). Will this driver work here ? -- Manuel Bouyer, LIP6, Universite Paris VI. manuel.bou...@lip6.fr NetBSD: 26 ans d'experience feront toujours la difference --