Module Name: src
Committed By: matt
Date: Thu Feb 25 23:30:05 UTC 2010
Modified Files:
src/sys/arch/powerpc/include: spr.h
src/sys/arch/powerpc/include/ibm4xx: Makefile
src/sys/arch/powerpc/include/oea: Makefile
Added Files:
src/sys/arch/powerpc/include/ibm4xx: spr.h
src/sys/arch/powerpc/include/oea: spr.h
Log Message:
Split <powerpc/spr.h> into a common <powerpc/spr.h> and <powerpc/XXX/spr.h>
where XXX is ibm4xx or oea.
To generate a diff of this commit:
cvs rdiff -u -r1.44 -r1.45 src/sys/arch/powerpc/include/spr.h
cvs rdiff -u -r1.5 -r1.6 src/sys/arch/powerpc/include/ibm4xx/Makefile
cvs rdiff -u -r0 -r1.1 src/sys/arch/powerpc/include/ibm4xx/spr.h
cvs rdiff -u -r1.1 -r1.2 src/sys/arch/powerpc/include/oea/Makefile
cvs rdiff -u -r0 -r1.1 src/sys/arch/powerpc/include/oea/spr.h
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/arch/powerpc/include/spr.h
diff -u src/sys/arch/powerpc/include/spr.h:1.44 src/sys/arch/powerpc/include/spr.h:1.45
--- src/sys/arch/powerpc/include/spr.h:1.44 Sat Feb 23 19:54:54 2008
+++ src/sys/arch/powerpc/include/spr.h Thu Feb 25 23:30:04 2010
@@ -1,4 +1,4 @@
-/* $NetBSD: spr.h,v 1.44 2008/02/23 19:54:54 matt Exp $ */
+/* $NetBSD: spr.h,v 1.45 2010/02/25 23:30:04 matt Exp $ */
#ifndef _POWERPC_SPR_H_
#define _POWERPC_SPR_H_
@@ -17,524 +17,31 @@
/*
* Special Purpose Register declarations.
*
- * The first column in the comments indicates which PowerPC
- * architectures the SPR is valid on - 4 for 4xx series,
- * 6 for 6xx/7xx series and 8 for 8xx and 8xxx series.
+ * The first column in the comments indicates which PowerPC architectures the
+ * SPR is valid on - E for BookE series, 4 for 4xx series,
+ * 6 for 6xx/7xx series and 8 for 8xx and 8xxx (but not 85xx) series.
*/
-#define SPR_MQ 0x000 /* .6. 601 MQ register */
-#define SPR_XER 0x001 /* 468 Fixed Point Exception Register */
-#define SPR_RTCU_R 0x004 /* .6. 601 RTC Upper - Read */
-#define SPR_RTCL_R 0x005 /* .6. 601 RTC Lower - Read */
-#define SPR_LR 0x008 /* 468 Link Register */
-#define SPR_CTR 0x009 /* 468 Count Register */
-#define SPR_DSISR 0x012 /* .68 DSI exception source */
-#define DSISR_DIRECT 0x80000000 /* Direct-store error exception */
-#define DSISR_NOTFOUND 0x40000000 /* Translation not found */
-#define DSISR_PROTECT 0x08000000 /* Memory access not permitted */
-#define DSISR_INVRX 0x04000000 /* Reserve-indexed insn direct-store access */
-#define DSISR_STORE 0x02000000 /* Store operation */
-#define DSISR_DABR 0x00400000 /* DABR match */
-#define DSISR_SEGMENT 0x00200000 /* XXX; not in 6xx PEM */
-#define DSISR_EAR 0x00100000 /* eciwx/ecowx && EAR[E] == 0 */
-#define SPR_DAR 0x013 /* .68 Data Address Register */
-#define SPR_RTCU_W 0x014 /* .6. 601 RTC Upper - Write */
-#define SPR_RTCL_W 0x015 /* .6. 601 RTC Lower - Write */
-#define SPR_DEC 0x016 /* .68 DECrementer register */
-#define SPR_SDR1 0x019 /* .68 Page table base address register */
-#define SPR_SRR0 0x01a /* 468 Save/Restore Register 0 */
-#define SPR_SRR1 0x01b /* 468 Save/Restore Register 1 */
-#define SPR_44XPID 0x030 /* 4.. 440 Process ID */
-#define SPR_EIE 0x050 /* ..8 Exception Interrupt ??? */
-#define SPR_EID 0x051 /* ..8 Exception Interrupt ??? */
-#define SPR_NRI 0x052 /* ..8 Exception Interrupt ??? */
-#define SPR_USPRG0 0x100 /* 4.. User SPR General 0 */
-#define SPR_VRSAVE 0x100 /* .6. AltiVec VRSAVE */
-#define SPR_SPRG0 0x110 /* 468 SPR General 0 */
-#define SPR_SPRG1 0x111 /* 468 SPR General 1 */
-#define SPR_SPRG2 0x112 /* 468 SPR General 2 */
-#define SPR_SPRG3 0x113 /* 468 SPR General 3 */
-#define SPR_SPRG4 0x114 /* 4.. SPR General 4 */
-#define SPR_SPRG5 0x115 /* 4.. SPR General 5 */
-#define SPR_SPRG6 0x116 /* 4.. SPR General 6 */
-#define SPR_SPRG7 0x117 /* 4.. SPR General 7 */
-#define SPR_ASR 0x118 /* ... Address Space Register (PPC64) */
-#define SPR_EAR 0x11a /* .68 External Access Register */
-#define SPR_TBL 0x11c /* 468 Time Base Lower */
-#define SPR_TBU 0x11d /* 468 Time Base Upper */
-#define SPR_PVR 0x11f /* 468 Processor Version Register */
-#define MPC601 0x0001
-#define MPC603 0x0003
-#define MPC604 0x0004
-#define MPC602 0x0005
-#define MPC603e 0x0006
-#define MPC603ev 0x0007
-#define MPC750 0x0008
-#define MPC604e 0x0009
-#define MPC604ev 0x000a
-#define MPC7400 0x000c
-#define MPC620 0x0014
-#define IBM403 0x0020
-#define IBM401A1 0x0021
-#define IBM401B2 0x0022
-#define IBM401C2 0x0023
-#define IBM401D2 0x0024
-#define IBM401E2 0x0025
-#define IBM401F2 0x0026
-#define IBM401G2 0x0027
-#define IBMRS64II 0x0033
-#define IBMRS64IIIp 0x0034
-#define IBMPOWER4 0x0035
-#define IBMRS64IIIi 0x0036
-#define IBMRS64IV 0x0037
-#define IBMPOWER4II 0x0038
-#define IBM970 0x0039
-#define IBMPOWER5GR 0x003a
-#define IBMPOWER5GS 0x003b
-#define IBM970FX 0x003c
-#define IBMPOWER6 0x003e
-#define IBMPOWER3 0x0040
-#define IBMPOWER3II 0x0041
-#define IBM970MP 0x0044
-#define IBM970GX 0x0045
-#define MPC860 0x0050
-#define IBMCELL 0x0070
-#define MPC8240 0x0081
-#define PA6T 0x0090
-#define IBMPOWER6P5 0x0f00
-#define XILVIRTEX 0x2001
-#define IBM405GP 0x4011
-#define IBMSTB03 0x4013
-#define IBMSTB04 0x4081
-#define IBM405GS3 0x40b1
-#define IBM405H 0x4141
-#define IBM405L 0x4161
-#define IBM405LP 0x41f1
-#define IBM405GPR 0x5091
-#define IBM405EP 0x5121
-#define IBMSTB25 0x5151
-#define IBM750FX 0x7000
-#define IBM750GX 0x7002
-#define MPC7450 0x8000
-#define MPC7455 0x8001
-#define MPC7457 0x8002
-#define MPC7447A 0x8003
-#define MPC7448 0x8004
-#define MPC745X_P(v) ((v & 0xFFF8) == 0x8000)
-#define MPC7410 0x800c
-#define MPC5200 0x8011
-#define MPCe500 0x8020
-#define MPCe500v2 0x8021
-#define MPC8245 0x8081
-#define MPCG2 0x8082
-#define MPCe300c1 0x8083
-#define MPCe300c2 0x8084
-#define MPCe300c3 0x8085
-
-#define SPR_IBAT0U 0x210 /* .68 Instruction BAT Reg 0 Upper */
-#define SPR_IBAT0L 0x211 /* .6. Instruction BAT Reg 0 Lower */
-#define SPR_IBAT1U 0x212 /* .6. Instruction BAT Reg 1 Upper */
-#define SPR_IBAT1L 0x213 /* .6. Instruction BAT Reg 1 Lower */
-#define SPR_IBAT2U 0x214 /* .6. Instruction BAT Reg 2 Upper */
-#define SPR_IBAT2L 0x215 /* .6. Instruction BAT Reg 2 Lower */
-#define SPR_IBAT3U 0x216 /* .6. Instruction BAT Reg 3 Upper */
-#define SPR_IBAT3L 0x217 /* .6. Instruction BAT Reg 3 Lower */
-#define SPR_DBAT0U 0x218 /* .6. Data BAT Reg 0 Upper */
-#define SPR_DBAT0L 0x219 /* .6. Data BAT Reg 0 Lower */
-#define SPR_DBAT1U 0x21a /* .6. Data BAT Reg 1 Upper */
-#define SPR_DBAT1L 0x21b /* .6. Data BAT Reg 1 Lower */
-#define SPR_DBAT2U 0x21c /* .6. Data BAT Reg 2 Upper */
-#define SPR_DBAT2L 0x21d /* .6. Data BAT Reg 2 Lower */
-#define SPR_DBAT3U 0x21e /* .6. Data BAT Reg 3 Upper */
-#define SPR_DBAT3L 0x21f /* .6. Data BAT Reg 3 Lower */
-#define SPR_IC_CST 0x230 /* ..8 Instruction Cache CSR */
-#define IC_CST_IEN 0x80000000 /* I cache is ENabled (RO) */
-#define IC_CST_CMD_INVALL 0x0c000000 /* I cache invalidate all */
-#define IC_CST_CMD_UNLOCKALL 0x0a000000 /* I cache unlock all */
-#define IC_CST_CMD_UNLOCK 0x08000000 /* I cache unlock block */
-#define IC_CST_CMD_LOADLOCK 0x06000000 /* I cache load & lock block */
-#define IC_CST_CMD_DISABLE 0x04000000 /* I cache disable */
-#define IC_CST_CMD_ENABLE 0x02000000 /* I cache enable */
-#define IC_CST_CCER1 0x00200000 /* I cache error type 1 (RO) */
-#define IC_CST_CCER2 0x00100000 /* I cache error type 2 (RO) */
-#define IC_CST_CCER3 0x00080000 /* I cache error type 3 (RO) */
-#define SPR_IBAT4U 0x230 /* .6. Instruction BAT Reg 4 Upper */
-#define SPR_IC_ADR 0x231 /* ..8 Instruction Cache Address */
-#define SPR_IBAT4L 0x231 /* .6. Instruction BAT Reg 4 Lower */
-#define SPR_IC_DAT 0x232 /* ..8 Instruction Cache Data */
-#define SPR_IBAT5U 0x232 /* .6. Instruction BAT Reg 5 Upper */
-#define SPR_IBAT5L 0x233 /* .6. Instruction BAT Reg 5 Lower */
-#define SPR_IBAT6U 0x234 /* .6. Instruction BAT Reg 6 Upper */
-#define SPR_IBAT6L 0x235 /* .6. Instruction BAT Reg 6 Lower */
-#define SPR_IBAT7U 0x236 /* .6. Instruction BAT Reg 7 Upper */
-#define SPR_IBAT7L 0x237 /* .6. Instruction BAT Reg 7 Lower */
-#define SPR_DC_CST 0x238 /* ..8 Data Cache CSR */
-#define DC_CST_DEN 0x80000000 /* D cache ENabled (RO) */
-#define DC_CST_DFWT 0x40000000 /* D cache Force Write-Thru (RO) */
-#define DC_CST_LES 0x20000000 /* D cache Little Endian Swap (RO) */
-#define DC_CST_CMD_FLUSH 0x0e000000 /* D cache invalidate all */
-#define DC_CST_CMD_INVALL 0x0c000000 /* D cache invalidate all */
-#define DC_CST_CMD_UNLOCKALL 0x0a000000 /* D cache unlock all */
-#define DC_CST_CMD_UNLOCK 0x08000000 /* D cache unlock block */
-#define DC_CST_CMD_CLRLESWAP 0x07000000 /* D cache clr little-endian swap */
-#define DC_CST_CMD_LOADLOCK 0x06000000 /* D cache load & lock block */
-#define DC_CST_CMD_SETLESWAP 0x05000000 /* D cache set little-endian swap */
-#define DC_CST_CMD_DISABLE 0x04000000 /* D cache disable */
-#define DC_CST_CMD_CLRFWT 0x03000000 /* D cache clear forced write-thru */
-#define DC_CST_CMD_ENABLE 0x02000000 /* D cache enable */
-#define DC_CST_CMD_SETFWT 0x01000000 /* D cache set forced write-thru */
-#define DC_CST_CCER1 0x00200000 /* D cache error type 1 (RO) */
-#define DC_CST_CCER2 0x00100000 /* D cache error type 2 (RO) */
-#define DC_CST_CCER3 0x00080000 /* D cache error type 3 (RO) */
-#define SPR_DBAT4U 0x238 /* .6. Data BAT Reg 4 Upper */
-#define SPR_DC_ADR 0x239 /* ..8 Data Cache Address */
-#define SPR_DBAT4L 0x239 /* .6. Data BAT Reg 4 Lower */
-#define SPR_DC_DAT 0x23a /* ..8 Data Cache Data */
-#define SPR_DBAT5U 0x23a /* .6. Data BAT Reg 5 Upper */
-#define SPR_DBAT5L 0x23b /* .6. Data BAT Reg 5 Lower */
-#define SPR_DBAT6U 0x23c /* .6. Data BAT Reg 6 Upper */
-#define SPR_DBAT6L 0x23d /* .6. Data BAT Reg 6 Lower */
-#define SPR_DBAT7U 0x23e /* .6. Data BAT Reg 7 Upper */
-#define SPR_DBAT7L 0x23f /* .6. Data BAT Reg 7 Lower */
-#define SPR_MI_CTR 0x310 /* ..8 IMMU control */
-#define Mx_CTR_GPM 0x80000000 /* Group Protection Mode */
-#define Mx_CTR_PPM 0x40000000 /* Page Protection Mode */
-#define Mx_CTR_CIDEF 0x20000000 /* Cache-Inhibit DEFault */
-#define MD_CTR_WTDEF 0x20000000 /* Write-Through DEFault */
-#define Mx_CTR_RSV4 0x08000000 /* Reserve 4 TLB entries */
-#define MD_CTR_TWAM 0x04000000 /* TableWalk Assist Mode */
-#define Mx_CTR_PPCS 0x02000000 /* Priv/user state compare mode */
-#define Mx_CTR_TLB_INDX 0x000001f0 /* TLB index mask */
-#define Mx_CTR_TLB_INDX_BITPOS 8 /* TLB index shift */
-#define SPR_MI_AP 0x312 /* ..8 IMMU access protection */
-#define Mx_GP_SUPER(n) (0 << (2*(15-(n)))) /* access is supervisor */
-#define Mx_GP_PAGE (1 << (2*(15-(n)))) /* access is page protect */
-#define Mx_GP_SWAPPED (2 << (2*(15-(n)))) /* access is swapped */
-#define Mx_GP_USER (3 << (2*(15-(n)))) /* access is user */
-#define SPR_MI_EPN 0x313 /* ..8 IMMU effective number */
-#define Mx_EPN_EPN 0xfffff000 /* Effective Page Number mask */
-#define Mx_EPN_EV 0x00000020 /* Entry Valid */
-#define Mx_EPN_ASID 0x0000000f /* Address Space ID */
-#define SPR_MI_TWC 0x315 /* ..8 IMMU tablewalk control */
-#define MD_TWC_L2TB 0xfffff000 /* Level-2 Tablewalk Base */
-#define Mx_TWC_APG 0x000001e0 /* Access Protection Group */
-#define Mx_TWC_G 0x00000010 /* Guarded memory */
-#define Mx_TWC_PS 0x0000000c /* Page Size (L1) */
-#define MD_TWC_WT 0x00000002 /* Write-Through */
-#define Mx_TWC_V 0x00000001 /* Entry Valid */
-#define SPR_MI_RPN 0x316 /* ..8 IMMU real (phys) page number */
-#define Mx_RPN_RPN 0xfffff000 /* Real Page Number */
-#define Mx_RPN_PP 0x00000ff0 /* Page Protection */
-#define Mx_RPN_SPS 0x00000008 /* Small Page Size */
-#define Mx_RPN_SH 0x00000004 /* SHared page */
-#define Mx_RPN_CI 0x00000002 /* Cache Inhibit */
-#define Mx_RPN_V 0x00000001 /* Valid */
-#define SPR_MD_CTR 0x318 /* ..8 DMMU control */
-#define SPR_M_CASID 0x319 /* ..8 CASID */
-#define M_CASID 0x0000000f /* Current AS Id */
-#define SPR_MD_AP 0x31a /* ..8 DMMU access protection */
-#define SPR_MD_EPN 0x31b /* ..8 DMMU effective number */
-#define SPR_M_TWB 0x31c /* ..8 MMU tablewalk base */
-#define M_TWB_L1TB 0xfffff000 /* level-1 translation base */
-#define M_TWB_L1INDX 0x00000ffc /* level-1 index */
-#define SPR_MD_TWC 0x31d /* ..8 DMMU tablewalk control */
-#define SPR_MD_RPN 0x31e /* ..8 DMMU real (phys) page number */
-#define SPR_MD_TW 0x31f /* ..8 MMU tablewalk scratch */
-#define SPR_MI_CAM 0x330 /* ..8 IMMU CAM entry read */
-#define SPR_MI_RAM0 0x331 /* ..8 IMMU RAM entry read reg 0 */
-#define SPR_MI_RAM1 0x332 /* ..8 IMMU RAM entry read reg 1 */
-#define SPR_MD_CAM 0x338 /* ..8 IMMU CAM entry read */
-#define SPR_MD_RAM0 0x339 /* ..8 IMMU RAM entry read reg 0 */
-#define SPR_MD_RAM1 0x33a /* ..8 IMMU RAM entry read reg 1 */
-#define SPR_UMMCR2 0x3a0 /* .6. User Monitor Mode Control Register 2 */
-#define SPR_UMMCR0 0x3a8 /* .6. User Monitor Mode Control Register 0 */
-#define SPR_USIA 0x3ab /* .6. User Sampled Instruction Address */
-#define SPR_UMMCR1 0x3ac /* .6. User Monitor Mode Control Register 1 */
-#define SPR_ZPR 0x3b0 /* 4.. Zone Protection Register */
-#define SPR_MMCR2 0x3b0 /* .6. Monitor Mode Control Register 2 */
-#define SPR_MMCR2_THRESHMULT_32 0x80000000 /* Multiply MMCR0 threshold by 32 */
-#define SPR_MMCR2_THRESHMULT_2 0x00000000 /* Multiply MMCR0 threshold by 2 */
-#define SPR_PID 0x3b1 /* 4.. Process ID */
-#define SPR_PMC5 0x3b1 /* .6. Performance Counter Register 5 */
-#define SPR_PMC6 0x3b2 /* .6. Performance Counter Register 6 */
-#define SPR_MMUCR 0x3b2 /* 4.. MMU Control Register */
-#define MMUCR_SW0A 0x01000000 /* Store WithOut Allocate */
-#define MMUCR_U1TE 0x00400000 /* U1 Transient Enable */
-#define MMUCR_U2SWOAE 0x00200000 /* U2 SWOA Enab */
-#define MMUCR_DULXE 0x00080000 /* Data Cache Unlock Exc. Ena. */
-#define MMUCR_IULXE 0x00040000 /* Inst. Cache Unlock Exc. Ena. */
-#define MMUCR_STS 0x00010000 /* Search Translation Space [TS] */
-#define MMUCR_STID 0x000000ff /* Search Translation ID */
-#define SPR_CCR0 0x3b3 /* 4.. Core Configuration Register 0 */
-#define SPR_IAC3 0x3b4 /* 4.. Instruction Address Compare 3 */
-#define SPR_IAC4 0x3b5 /* 4.. Instruction Address Compare 4 */
-#define SPR_DVC1 0x3b6 /* 4.. Data Value Compare 1 */
-#define SPR_DVC2 0x3b7 /* 4.. Data Value Compare 2 */
-#define SPR_MMCR0 0x3b8 /* .6. Monitor Mode Control Register 0 */
-#define MMCR0_FC 0x80000000 /* Freeze counters */
-#define MMCR0_FCS 0x40000000 /* Freeze counters in supervisor mode */
-#define MMCR0_FCP 0x20000000 /* Freeze counters in user mode */
-#define MMCR0_FCM1 0x10000000 /* Freeze counters when mark=1 */
-#define MMCR0_FCM0 0x08000000 /* Freeze counters when mark=0 */
-#define MMCR0_PMXE 0x04000000 /* Enable PM interrupt */
-#define MMCR0_FCECE 0x02000000 /* Freeze counters after event */
-#define MMCR0_TBSEL_15 0x01800000 /* Count bit 15 of TBL */
-#define MMCR0_TBSEL_19 0x01000000 /* Count bit 19 of TBL */
-#define MMCR0_TBSEL_23 0x00800000 /* Count bit 23 of TBL */
-#define MMCR0_TBSEL_31 0x00000000 /* Count bit 31 of TBL */
-#define MMCR0_TBEE 0x00400000 /* Time-base event enable */
-#define MMCRO_THRESHOLD(x) ((x) << 16) /* Threshold value */
-#define MMCR0_PMC1CE 0x00008000 /* PMC1 condition enable */
-#define MMCR0_PMCNCE 0x00004000 /* PMCn condition enable */
-#define MMCR0_TRIGGER 0x00002000 /* Trigger */
-#define MMCR0_PMC1SEL(x) ((x) << 6) /* PMC1 selector */
-#define MMCR0_PMC2SEL(x) ((x) << 0) /* PMC2 selector */
-#define SPR_SGR 0x3b9 /* 4.. Storage Guarded Register */
-#define SPR_PMC1 0x3b9 /* .6. Performance Counter Register 1 */
-#define SPR_DCWR 0x3ba /* 4.. Data Cache Write-through Register */
-#define SPR_PMC2 0x3ba /* .6. Performance Counter Register 2 */
-#define SPR_SLER 0x3bb /* 4.. Storage Little Endian Register */
-#define SPR_SIA 0x3bb /* .6. Sampled Instruction Address */
-#define SPR_MMCR1 0x3bc /* .6. Monitor Mode Control Register 2 */
-#define MMCR1_PMC3SEL(x) ((x) << 27) /* PMC 3 selector */
-#define MMCR1_PMC4SEL(x) ((x) << 22) /* PMC 4 selector */
-#define MMCR1_PMC5SEL(x) ((x) << 17) /* PMC 5 selector */
-#define MMCR1_PMC6SEL(x) ((x) << 11) /* PMC 6 selector */
-
-#define SPR_SU0R 0x3bc /* 4.. Storage User-defined 0 Register */
-#define SPR_DBCR1 0x3bd /* 4.. Debug Control Register 1 */
-#define SPR_PMC3 0x3bd /* .6. Performance Counter Register 3 */
-#define SPR_PMC4 0x3be /* .6. Performance Counter Register 4 */
-#define SPR_DMISS 0x3d0 /* .68 Data TLB Miss Address Register */
-#define SPR_DCMP 0x3d1 /* .68 Data TLB Compare Register */
-#define SPR_HASH1 0x3d2 /* .68 Primary Hash Address Register */
-#define SPR_ICDBDR 0x3d3 /* 4.. Instruction Cache Debug Data Register */
-#define SPR_HASH2 0x3d3 /* .68 Secondary Hash Address Register */
-#define SPR_ESR 0x3d4 /* 4.. Exception Syndrome Register */
-#define ESR_MCI 0x80000000 /* Machine check - instruction */
-#define ESR_PIL 0x08000000 /* Program interrupt - illegal */
-#define ESR_PPR 0x04000000 /* Program interrupt - privileged */
-#define ESR_PTR 0x02000000 /* Program interrupt - trap */
-#define ESR_DST 0x00800000 /* Data storage interrupt - store fault */
-#define ESR_DIZ 0x00800000 /* Data/instruction storage interrupt - zone fault */
-#define ESR_U0F 0x00008000 /* Data storage interrupt - U0 fault */
-#define SPR_IMISS 0x3d4 /* .68 Instruction TLB Miss Address Register */
-#define SPR_TLBMISS 0x3d4 /* .6. TLB Miss Address Register */
-#define SPR_DEAR 0x3d5 /* 4.. Data Error Address Register */
-#define SPR_ICMP 0x3d5 /* .68 Instruction TLB Compare Register */
-#define SPR_PTEHI 0x3d5 /* .6. Instruction TLB Compare Register */
-#define SPR_EVPR 0x3d6 /* 4.. Exception Vector Prefix Register */
-#define SPR_RPA 0x3d6 /* .68 Required Physical Address Register */
-#define SPR_PTELO 0x3d6 /* .6. Required Physical Address Register */
-#define SPR_TSR 0x3d8 /* 4.. Timer Status Register */
-#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
-#define TSR_WIS 0x40000000 /* Watchdog Interrupt Status */
-#define TSR_WRS_MASK 0x30000000 /* Watchdog Reset Status */
-#define TSR_WRS_NONE 0x00000000 /* No watchdog reset has occurred */
-#define TSR_WRS_CORE 0x10000000 /* Core reset was forced by the watchdog */
-#define TSR_WRS_CHIP 0x20000000 /* Chip reset was forced by the watchdog */
-#define TSR_WRS_SYSTEM 0x30000000 /* System reset was forced by the watchdog */
-#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
-#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
-#define SPR_TCR 0x3da /* 4.. Timer Control Register */
-#define TCR_WP_MASK 0xc0000000 /* Watchdog Period mask */
-#define TCR_WP_2_17 0x00000000 /* 2**17 clocks */
-#define TCR_WP_2_21 0x40000000 /* 2**21 clocks */
-#define TCR_WP_2_25 0x80000000 /* 2**25 clocks */
-#define TCR_WP_2_29 0xc0000000 /* 2**29 clocks */
-#define TCR_WRC_MASK 0x30000000 /* Watchdog Reset Control mask */
-#define TCR_WRC_NONE 0x00000000 /* No watchdog reset */
-#define TCR_WRC_CORE 0x10000000 /* Core reset */
-#define TCR_WRC_CHIP 0x20000000 /* Chip reset */
-#define TCR_WRC_SYSTEM 0x30000000 /* System reset */
-#define TCR_WIE 0x08000000 /* Watchdog Interrupt Enable */
-#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
-#define TCR_FP_MASK 0x03000000 /* FIT Period */
-#define TCR_FP_2_9 0x00000000 /* 2**9 clocks */
-#define TCR_FP_2_13 0x01000000 /* 2**13 clocks */
-#define TCR_FP_2_17 0x02000000 /* 2**17 clocks */
-#define TCR_FP_2_21 0x03000000 /* 2**21 clocks */
-#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
-#define TCR_ARE 0x00400000 /* Auto Reload Enable */
-#define SPR_PIT 0x3db /* 4.. Programmable Interval Timer */
-#define SPR_SRR2 0x3de /* 4.. Save/Restore Register 2 */
-#define SPR_SRR3 0x3df /* 4.. Save/Restore Register 3 */
-#define SPR_DBSR 0x3f0 /* 4.. Debug Status Register */
-#define DBSR_IC 0x80000000 /* Instruction completion debug event */
-#define DBSR_BT 0x40000000 /* Branch Taken debug event */
-#define DBSR_EDE 0x20000000 /* Exception debug event */
-#define DBSR_TIE 0x10000000 /* Trap Instruction debug event */
-#define DBSR_UDE 0x08000000 /* Unconditional debug event */
-#define DBSR_IA1 0x04000000 /* IAC1 debug event */
-#define DBSR_IA2 0x02000000 /* IAC2 debug event */
-#define DBSR_DR1 0x01000000 /* DAC1 Read debug event */
-#define DBSR_DW1 0x00800000 /* DAC1 Write debug event */
-#define DBSR_DR2 0x00400000 /* DAC2 Read debug event */
-#define DBSR_DW2 0x00200000 /* DAC2 Write debug event */
-#define DBSR_IDE 0x00100000 /* Imprecise debug event */
-#define DBSR_IA3 0x00080000 /* IAC3 debug event */
-#define DBSR_IA4 0x00040000 /* IAC4 debug event */
-#define DBSR_MRR 0x00000300 /* Most recent reset */
-#define SPR_HID0 0x3f0 /* ..8 Hardware Implementation Register 0 */
-#define SPR_HID1 0x3f1 /* ..8 Hardware Implementation Register 1 */
-#define SPR_DBCR0 0x3f2 /* 4.. Debug Control Register 0 */
-#define DBCR0_EDM 0x80000000 /* External Debug Mode */
-#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
-#define DBCR0_RST_MASK 0x30000000 /* ReSeT */
-#define DBCR0_RST_NONE 0x00000000 /* No action */
-#define DBCR0_RST_CORE 0x10000000 /* Core reset */
-#define DBCR0_RST_CHIP 0x20000000 /* Chip reset */
-#define DBCR0_RST_SYSTEM 0x30000000 /* System reset */
-#define DBCR0_IC 0x08000000 /* Instruction Completion debug event */
-#define DBCR0_BT 0x04000000 /* Branch Taken debug event */
-#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
-#define DBCR0_TDE 0x01000000 /* Trap Debug Event */
-#define DBCR0_IA1 0x00800000 /* IAC (Instruction Address Compare) 1 debug event */
-#define DBCR0_IA2 0x00400000 /* IAC 2 debug event */
-#define DBCR0_IA12 0x00200000 /* Instruction Address Range Compare 1-2 */
-#define DBCR0_IA12X 0x00100000 /* IA12 eXclusive */
-#define DBCR0_IA3 0x00080000 /* IAC 3 debug event */
-#define DBCR0_IA4 0x00040000 /* IAC 4 debug event */
-#define DBCR0_IA34 0x00020000 /* Instruction Address Range Compare 3-4 */
-#define DBCR0_IA34X 0x00010000 /* IA34 eXclusive */
-#define DBCR0_IA12T 0x00008000 /* Instruction Address Range Compare 1-2 range Toggle */
-#define DBCR0_IA34T 0x00004000 /* Instruction Address Range Compare 3-4 range Toggle */
-#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
-#define SPR_IABR 0x3f2 /* ..8 Instruction Address Breakpoint Register 0 */
-#define SPR_HID2 0x3f3 /* ..8 Hardware Implementation Register 2 */
-#define SPR_IAC1 0x3f4 /* 4.. Instruction Address Compare 1 */
-#define SPR_IAC2 0x3f5 /* 4.. Instruction Address Compare 2 */
-#define SPR_DABR 0x3f5 /* .6. Data Address Breakpoint Register */
-#define SPR_DAC1 0x3f6 /* 4.. Data Address Compare 1 */
-#define SPR_MSSCR0 0x3f6 /* .6. Memory SubSystem Control Register */
-#define MSSCR0_SHDEN 0x80000000 /* 0: Shared-state enable */
-#define MSSCR0_SHDPEN3 0x40000000 /* 1: ~SHD[01] signal enable in MEI mode */
-#define MSSCR0_L1INTVEN 0x38000000 /* 2-4: L1 data cache ~HIT intervention enable */
-#define MSSCR0_L2INTVEN 0x07000000 /* 5-7: L2 data cache ~HIT intervention enable */
-#define MSSCR0_DL1HWF 0x00800000 /* 8: L1 data cache hardware flush */
-#define MSSCR0_MBO 0x00400000 /* 9: must be one */
-#define MSSCR0_EMODE 0x00200000 /* 10: MPX bus mode (read-only) */
-#define MSSCR0_ABD 0x00100000 /* 11: address bus driven (read-only) */
-#define MSSCR0_BMODE 0x0000c000 /* 16-17: Bus Mode (read-only) (7450) */
-#define MSSCR0_ID 0x00000040 /* 26: Processor ID */
-#define MSSCR0_L2PFE 0x00000003 /* 30-31: L2 prefetching enabled (7450) */
-#define SPR_DAC2 0x3f7 /* 4.. Data Address Compare 2 */
-#define SPR_L2PM 0x3f8 /* .6. L2 Private Memory Control Register */
-#define SPR_L2CR 0x3f9 /* .6. L2 Control Register */
-#define L2CR_L2E 0x80000000 /* 0: L2 enable */
-#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */
-#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */
-#define L2SIZ_2M 0x00000000
-#define L2SIZ_256K 0x10000000
-#define L2SIZ_512K 0x20000000
-#define L2SIZ_1M 0x30000000
-#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */
-#define L2CLK_DIS 0x00000000 /* disable L2 clock */
-#define L2CLK_10 0x02000000 /* core clock / 1 */
-#define L2CLK_15 0x04000000 /* / 1.5 */
-#define L2CLK_35 0x06000000 /* / 3.5 */
-#define L2CLK_20 0x08000000 /* / 2 */
-#define L2CLK_25 0x0a000000 /* / 2.5 */
-#define L2CLK_30 0x0c000000 /* / 3 */
-#define L2CLK_40 0x0e000000 /* / 4 */
-#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */
-#define L2RAM_FLOWTHRU_BURST 0x00000000
-#define L2RAM_PIPELINE_BURST 0x01000000
-#define L2RAM_PIPELINE_LATE 0x01800000
-#define L2CR_L2DO 0x00400000 /* 9: L2 data-only.
- Setting this bit disables instruction
- caching. */
-#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */
-#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable).
- Enables automatic operation of the
- L2ZZ (low-power mode) signal. */
-#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */
-#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */
-#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */
-#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */
-#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */
-#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */
-#define L2CR_L2FA 0x00001000 /* 19: L2 flush assist (for software flush). */
-#define L2CR_L2HWF 0x00000800 /* 20: L2 hardware flush. */
-#define L2CR_L2IO 0x00000400 /* 21: L2 instruction-only. */
-#define L2CR_L2CLKSTP 0x00000200 /* 22: L2 clock stop. */
-#define L2CR_L2DRO 0x00000100 /* 23: L2DLL rollover checkstop enable. */
-#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */
- /* progress (read only). */
-#define SPR_L3CR 0x3fa /* .6. L3 Control Register */
-#define L3CR_RESERVED 0x0438003a /* Reserved bits in L3CR */
-#define L3CR_L3E 0x80000000 /* 0: L3 enable */
-#define L3CR_L3PE 0x40000000 /* 1: L3 data parity checking enable */
-#define L3CR_L3APE 0x20000000 /* 2: L3 address parity checking enable */
-#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */
-#define L3SIZ_1M 0x00000000
-#define L3SIZ_2M 0x10000000
-#define L3CR_L3CLKEN 0x08000000 /* 4: Enables the L3_CLK[0:1] signals */
-#define L3CR_L3CLK 0x03800000 /* 6-8: L3 clock ratio */
-#define L3CLK_60 0x00000000 /* core clock / 6 */
-#define L3CLK_20 0x01000000 /* / 2 */
-#define L3CLK_25 0x01800000 /* / 2.5 */
-#define L3CLK_30 0x02000000 /* / 3 */
-#define L3CLK_35 0x02800000 /* / 3.5 */
-#define L3CLK_40 0x03000000 /* / 4 */
-#define L3CLK_50 0x03800000 /* / 5 */
-#define L3CR_L3IO 0x00400000 /* 9: L3 instruction-only mode */
-#define L3CR_L3SPO 0x00040000 /* 13: L3 sample point override */
-#define L3CR_L3CKSP 0x00030000 /* 14-15: L3 clock sample point */
-#define L3CKSP_2 0x00000000 /* 2 clocks */
-#define L3CKSP_3 0x00010000 /* 3 clocks */
-#define L3CKSP_4 0x00020000 /* 4 clocks */
-#define L3CKSP_5 0x00030000 /* 5 clocks */
-#define L3CR_L3PSP 0x0000e000 /* 16-18: L3 P-clock sample point */
-#define L3PSP_0 0x00000000 /* 0 clocks */
-#define L3PSP_1 0x00002000 /* 1 clocks */
-#define L3PSP_2 0x00004000 /* 2 clocks */
-#define L3PSP_3 0x00006000 /* 3 clocks */
-#define L3PSP_4 0x00008000 /* 4 clocks */
-#define L3PSP_5 0x0000a000 /* 5 clocks */
-#define L3CR_L3REP 0x00001000 /* 19: L3 replacement algorithm (0=default, 1=alternate) */
-#define L3CR_L3HWF 0x00000800 /* 20: L3 hardware flush */
-#define L3CR_L3I 0x00000400 /* 21: L3 global invalidate */
-#define L3CR_L3RT 0x00000300 /* 22-23: L3 SRAM type */
-#define L3RT_MSUG2_DDR 0x00000000 /* MSUG2 DDR SRAM */
-#define L3RT_PIPELINE_LATE 0x00000100 /* Pipelined (register-register) synchronous late-write SRAM */
-#define L3RT_PB2_SRAM 0x00000300 /* PB2 SRAM */
-#define L3CR_L3NIRCA 0x00000080 /* 24: L3 non-integer ratios clock adjustment for the SRAM */
-#define L3CR_L3DO 0x00000040 /* 25: L3 data-only mode */
-#define L3CR_PMEN 0x00000004 /* 29: Private memory enable */
-#define L3CR_PMSIZ 0x00000004 /* 31: Private memory size (0=1MB, 1=2MB) */
-#define SPR_DCCR 0x3fa /* 4.. Data Cache Cachability Register */
-#define SPR_ICCR 0x3fb /* 4.. Instruction Cache Cachability Register */
-#define SPR_THRM1 0x3fc /* .6. Thermal Management Register */
-#define SPR_THRM2 0x3fd /* .6. Thermal Management Register */
-#define SPR_THRM_TIN 0x80000000 /* Thermal interrupt bit (RO) */
-#define SPR_THRM_TIV 0x40000000 /* Thermal interrupt valid (RO) */
-#define SPR_THRM_THRESHOLD(x) ((x) << 23) /* Thermal sensor threshold */
-#define SPR_THRM_TID 0x00000004 /* Thermal interrupt direction */
-#define SPR_THRM_TIE 0x00000002 /* Thermal interrupt enable */
-#define SPR_THRM_VALID 0x00000001 /* Valid bit */
-#define SPR_THRM3 0x3fe /* .6. Thermal Management Register */
-#define SPR_THRM_TIMER(x) ((x) << 1) /* Sampling interval timer */
-#define SPR_THRM_ENABLE 0x00000001 /* TAU Enable */
-#define SPR_FPECR 0x3fe /* .6. Floating-Point Exception Cause Register */
-#define SPR_PIR 0x3ff /* .6. Processor Identification Register */
+#define SPR_XER 0x001 /* E468 Fixed Point Exception Register */
+#define SPR_LR 0x008 /* E468 Link Register */
+#define SPR_CTR 0x009 /* E468 Count Register */
+#define SPR_DEC 0x016 /* E468 DECrementer register */
+#define SPR_SRR0 0x01a /* E468 Save/Restore Register 0 */
+#define SPR_SRR1 0x01b /* E468 Save/Restore Register 1 */
+#define SPR_SPRG0 0x110 /* E468 SPR General 0 */
+#define SPR_SPRG1 0x111 /* E468 SPR General 1 */
+#define SPR_SPRG2 0x112 /* E468 SPR General 2 */
+#define SPR_SPRG3 0x113 /* E468 SPR General 3 */
+#define SPR_SPRG4 0x114 /* E4.. SPR General 4 */
+#define SPR_SPRG5 0x115 /* E4.. SPR General 5 */
+#define SPR_SPRG6 0x116 /* E4.. SPR General 6 */
+#define SPR_SPRG7 0x117 /* E4.. SPR General 7 */
+#define SPR_TBL 0x11c /* E468 Time Base Lower */
+#define SPR_TBU 0x11d /* E468 Time Base Upper */
+#define SPR_PVR 0x11f /* E468 Processor Version Register */
/* Time Base Register declarations */
-#define TBR_TBL 0x10c /* 468 Time Base Lower */
-#define TBR_TBU 0x10d /* 468 Time Base Upper */
-
-/* Performance counter declarations */
-#define PMC_OVERFLOW 0x80000000 /* Counter has overflowed */
-
-/* The first five countable [non-]events are common to all the PMC's */
-#define PMCN_NONE 0 /* Count nothing */
-#define PMCN_CYCLES 1 /* Processor cycles */
-#define PMCN_ICOMP 2 /* Instructions completed */
-#define PMCN_TBLTRANS 3 /* TBL bit transitions */
-#define PCMN_IDISPATCH 4 /* Instructions dispatched */
-
-/* SPRs specific to the IBM 970 series processors */
-#define SPR_HID4 0x3F4 /* 970 HID4 */
-#define SPR_HID5 0x3F6 /* 970 HID5 */
+#define TBR_TBL 0x10c /* E468 Time Base Lower */
+#define TBR_TBU 0x10d /* E468 Time Base Upper */
#endif /* !_POWERPC_SPR_H_ */
Index: src/sys/arch/powerpc/include/ibm4xx/Makefile
diff -u src/sys/arch/powerpc/include/ibm4xx/Makefile:1.5 src/sys/arch/powerpc/include/ibm4xx/Makefile:1.6
--- src/sys/arch/powerpc/include/ibm4xx/Makefile:1.5 Sun Dec 11 12:18:43 2005
+++ src/sys/arch/powerpc/include/ibm4xx/Makefile Thu Feb 25 23:30:05 2010
@@ -1,7 +1,7 @@
-# $NetBSD: Makefile,v 1.5 2005/12/11 12:18:43 christos Exp $
+# $NetBSD: Makefile,v 1.6 2010/02/25 23:30:05 matt Exp $
INCSDIR= /usr/include/powerpc/ibm4xx
-INCS= cpu.h pmap.h tlb.h
+INCS= cpu.h pmap.h spr.h tlb.h
.include <bsd.kinc.mk>
Index: src/sys/arch/powerpc/include/oea/Makefile
diff -u src/sys/arch/powerpc/include/oea/Makefile:1.1 src/sys/arch/powerpc/include/oea/Makefile:1.2
--- src/sys/arch/powerpc/include/oea/Makefile:1.1 Mon Feb 3 17:10:05 2003
+++ src/sys/arch/powerpc/include/oea/Makefile Thu Feb 25 23:30:05 2010
@@ -1,11 +1,11 @@
-# $NetBSD: Makefile,v 1.1 2003/02/03 17:10:05 matt Exp $
+# $NetBSD: Makefile,v 1.2 2010/02/25 23:30:05 matt Exp $
INCSDIR= /usr/include/powerpc/oea
INCS= bat.h \
hid.h hid_601.h \
pmap.h pte.h \
- sr_601.h \
+ spr.h sr_601.h \
vmparam.h
.include <bsd.kinc.mk>
Added files:
Index: src/sys/arch/powerpc/include/ibm4xx/spr.h
diff -u /dev/null src/sys/arch/powerpc/include/ibm4xx/spr.h:1.1
--- /dev/null Thu Feb 25 23:30:05 2010
+++ src/sys/arch/powerpc/include/ibm4xx/spr.h Thu Feb 25 23:30:05 2010
@@ -0,0 +1,151 @@
+/* $NetBSD: spr.h,v 1.1 2010/02/25 23:30:05 matt Exp $ */
+
+#ifndef _POWERPC_IBM4XX_SPR_H_
+#define _POWERPC_IBM4XX_SPR_H_
+
+/*
+ * IBM4xx Special Purpose Register declarations.
+ *
+ * The first column in the comments indicates which PowerPC architectures the
+ * SPR is valid on - E for BookE series, 4 for 4xx series,
+ * 6 for 6xx/7xx series and 8 for 8xx and 8xxx (but not 85xx) series.
+ */
+
+#define SPR_44XPID 0x030 /* E4.. 440 Process ID */
+#define SPR_USPRG0 0x100 /* E4.. User SPR General 0 */
+#define IBM403 0x0020
+#define IBM401A1 0x0021
+#define IBM401B2 0x0022
+#define IBM401C2 0x0023
+#define IBM401D2 0x0024
+#define IBM401E2 0x0025
+#define IBM401F2 0x0026
+#define IBM401G2 0x0027
+#define XILVIRTEX 0x2001
+#define IBM405GP 0x4011
+#define IBMSTB03 0x4013
+#define IBMSTB04 0x4081
+#define IBM405GS3 0x40b1
+#define IBM405H 0x4141
+#define IBM405L 0x4161
+#define IBM405LP 0x41f1
+#define IBM405GPR 0x5091
+#define IBM405EP 0x5121
+#define IBMSTB25 0x5151
+
+#define SPR_ZPR 0x3b0 /* .4.. Zone Protection Register */
+#define SPR_PID 0x3b1 /* .4.. Process ID */
+#define SPR_MMUCR 0x3b2 /* .4.. MMU Control Register */
+#define MMUCR_SW0A 0x01000000 /* Store WithOut Allocate */
+#define MMUCR_U1TE 0x00400000 /* U1 Transient Enable */
+#define MMUCR_U2SWOAE 0x00200000 /* U2 SWOA Enab */
+#define MMUCR_DULXE 0x00080000 /* Data Cache Unlock Exc. Ena. */
+#define MMUCR_IULXE 0x00040000 /* Inst. Cache Unlock Exc. Ena. */
+#define MMUCR_STS 0x00010000 /* Search Translation Space [TS] */
+#define MMUCR_STID 0x000000ff /* Search Translation ID */
+#define SPR_CCR0 0x3b3 /* .4.. Core Configuration Register 0 */
+#define SPR_IAC3 0x3b4 /* .4.. Instruction Address Compare 3 */
+#define SPR_IAC4 0x3b5 /* .4.. Instruction Address Compare 4 */
+#define SPR_DVC1 0x3b6 /* .4.. Data Value Compare 1 */
+#define SPR_DVC2 0x3b7 /* .4.. Data Value Compare 2 */
+#define SPR_SGR 0x3b9 /* .4.. Storage Guarded Register */
+#define SPR_DCWR 0x3ba /* .4.. Data Cache Write-through Register */
+#define SPR_SLER 0x3bb /* .4.. Storage Little Endian Register */
+#define SPR_SU0R 0x3bc /* .4.. Storage User-defined 0 Register */
+#define SPR_DBCR1 0x3bd /* .4.. Debug Control Register 1 */
+#define SPR_ICDBDR 0x3d3 /* .4.. Instruction Cache Debug Data Register */
+#define SPR_ESR 0x3d4 /* .4.. Exception Syndrome Register */
+#define ESR_MCI 0x80000000 /* 0: Machine check - instruction */
+#define ESR_PIL 0x08000000 /* 4: Program interrupt - illegal */
+#define ESR_PPR 0x04000000 /* 5: Program interrupt - privileged */
+#define ESR_PTR 0x02000000 /* 6: Program interrupt - trap */
+#define ESR_DST 0x00800000 /* 8: Data storage interrupt - store fault */
+#define ESR_DIZ 0x00800000 /* 8: Data/instruction storage interrupt - zone fault */
+#define ESR_ST 0x00800000 /* 8: Store operation */
+#define ESR_DLK 0x00200000 /* 10: dcache exception */
+#define ESR_ILK 0x00100000 /* 11: icache exception */
+#define ESR_BO 0x00020000 /* 14: Byte ordering exception */
+#define ESR_U0F 0x00008000 /* 16: Data storage interrupt - U0 fault */
+#define ESR_SPE 0x00000080 /* 24: SPE exception */
+#define SPR_DEAR 0x3d5 /* .4.. Data Error Address Register */
+#define SPR_EVPR 0x3d6 /* .4.. Exception Vector Prefix Register */
+#define SPR_TSR 0x3d8 /* .4.. Timer Status Register */
+#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
+#define TSR_WIS 0x40000000 /* Watchdog Interrupt Status */
+#define TSR_WRS_MASK 0x30000000 /* Watchdog Reset Status */
+#define TSR_WRS_NONE 0x00000000 /* No watchdog reset has occurred */
+#define TSR_WRS_CORE 0x10000000 /* Core reset was forced by the watchdog */
+#define TSR_WRS_CHIP 0x20000000 /* Chip reset was forced by the watchdog */
+#define TSR_WRS_SYSTEM 0x30000000 /* System reset was forced by the watchdog */
+#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
+#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
+#define SPR_TCR 0x3da /* .4.. Timer Control Register */
+#define TCR_WP_MASK 0xc0000000 /* Watchdog Period mask */
+#define TCR_WP_2_17 0x00000000 /* 2**17 clocks */
+#define TCR_WP_2_21 0x40000000 /* 2**21 clocks */
+#define TCR_WP_2_25 0x80000000 /* 2**25 clocks */
+#define TCR_WP_2_29 0xc0000000 /* 2**29 clocks */
+#define TCR_WRC_MASK 0x30000000 /* Watchdog Reset Control mask */
+#define TCR_WRC_NONE 0x00000000 /* No watchdog reset */
+#define TCR_WRC_CORE 0x10000000 /* Core reset */
+#define TCR_WRC_CHIP 0x20000000 /* Chip reset */
+#define TCR_WRC_SYSTEM 0x30000000 /* System reset */
+#define TCR_WIE 0x08000000 /* Watchdog Interrupt Enable */
+#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
+#define TCR_FP_MASK 0x03000000 /* FIT Period */
+#define TCR_FP_2_9 0x00000000 /* 2**9 clocks */
+#define TCR_FP_2_13 0x01000000 /* 2**13 clocks */
+#define TCR_FP_2_17 0x02000000 /* 2**17 clocks */
+#define TCR_FP_2_21 0x03000000 /* 2**21 clocks */
+#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
+#define TCR_ARE 0x00400000 /* Auto Reload Enable */
+#define SPR_PIT 0x3db /* .4.. Programmable Interval Timer */
+#define SPR_SRR2 0x3de /* .4.. Save/Restore Register 2 */
+#define SPR_SRR3 0x3df /* .4.. Save/Restore Register 3 */
+#define SPR_DBSR 0x3f0 /* .4.. Debug Status Register */
+#define DBSR_IC 0x80000000 /* Instruction completion debug event */
+#define DBSR_IDE 0x80000000 /* Imprecise debug event */
+#define DBSR_BT 0x40000000 /* Branch Taken debug event */
+#define DBSR_EDE 0x20000000 /* Exception debug event */
+#define DBSR_TIE 0x10000000 /* Trap Instruction debug event */
+#define DBSR_UDE 0x08000000 /* Unconditional debug event */
+#define DBSR_IA1 0x04000000 /* IAC1 debug event */
+#define DBSR_IA2 0x02000000 /* IAC2 debug event */
+#define DBSR_DR1 0x01000000 /* DAC1 Read debug event */
+#define DBSR_DW1 0x00800000 /* DAC1 Write debug event */
+#define DBSR_DR2 0x00400000 /* DAC2 Read debug event */
+#define DBSR_DW2 0x00200000 /* DAC2 Write debug event */
+#define DBSR_IA3 0x00080000 /* IAC3 debug event */
+#define DBSR_IA4 0x00040000 /* IAC4 debug event */
+#define DBSR_MRR 0x00000300 /* Most recent reset */
+#define SPR_DBCR0 0x3f2 /* .4.. Debug Control Register 0 */
+#define DBCR0_EDM 0x80000000 /* 0: External Debug Mode */
+#define DBCR0_IDM 0x40000000 /* 1: Internal Debug Mode */
+#define DBCR0_RST_MASK 0x30000000 /* 2..3: ReSeT */
+#define DBCR0_RST_NONE 0x00000000 /* No action */
+#define DBCR0_RST_CORE 0x10000000 /* Core reset */
+#define DBCR0_RST_CHIP 0x20000000 /* Chip reset */
+#define DBCR0_RST_SYSTEM 0x30000000 /* System reset */
+#define DBCR0_IC 0x08000000 /* 4: Instruction Completion debug event */
+#define DBCR0_BT 0x04000000 /* 5: Branch Taken debug event */
+#define DBCR0_EDE 0x02000000 /* 6: Exception Debug Event */
+#define DBCR0_TDE 0x01000000 /* 7: Trap Debug Event */
+#define DBCR0_IA1 0x00800000 /* 8: IAC (Instruction Address Compare) 1 debug event */
+#define DBCR0_IA2 0x00400000 /* 9: IAC 2 debug event */
+#define DBCR0_IA12 0x00200000 /* 10: Instruction Address Range Compare 1-2 */
+#define DBCR0_IA12X 0x00100000 /* 11: IA12 eXclusive */
+#define DBCR0_IA3 0x00080000 /* 12: IAC 3 debug event */
+#define DBCR0_IA4 0x00040000 /* 13: IAC 4 debug event */
+#define DBCR0_IA34 0x00020000 /* 14: Instruction Address Range Compare 3-4 */
+#define DBCR0_IA34X 0x00010000 /* 15: IA34 eXclusive */
+#define DBCR0_IA12T 0x00008000 /* 16: Instruction Address Range Compare 1-2 range Toggle */
+#define DBCR0_IA34T 0x00004000 /* 17: Instruction Address Range Compare 3-4 range Toggle */
+#define DBCR0_FT 0x00000001 /* 31: Freeze Timers on debug event */
+#define SPR_IAC1 0x3f4 /* .4.. Instruction Address Compare 1 */
+#define SPR_IAC2 0x3f5 /* .4.. Instruction Address Compare 2 */
+#define SPR_DAC1 0x3f6 /* .4.. Data Address Compare 1 */
+#define SPR_DAC2 0x3f7 /* .4.. Data Address Compare 2 */
+#define SPR_DCCR 0x3fa /* .4.. Data Cache Cachability Register */
+#define SPR_ICCR 0x3fb /* .4.. Instruction Cache Cachability Register */
+
+#endif /* !_POWERPC_IBM4XX_SPR_H_ */
Index: src/sys/arch/powerpc/include/oea/spr.h
diff -u /dev/null src/sys/arch/powerpc/include/oea/spr.h:1.1
--- /dev/null Thu Feb 25 23:30:05 2010
+++ src/sys/arch/powerpc/include/oea/spr.h Thu Feb 25 23:30:05 2010
@@ -0,0 +1,288 @@
+/* $NetBSD: spr.h,v 1.1 2010/02/25 23:30:05 matt Exp $ */
+
+#ifndef _POWERPC_OEA_SPR_H_
+#define _POWERPC_OEA_SPR_H_
+
+/*
+ * Special Purpose Register declarations.
+ *
+ * The first column in the comments indicates which PowerPC architectures the
+ * SPR is valid on - E for BookE series, 4 for 4xx series,
+ * 6 for 6xx/7xx series and 8 for 8xx (but not most 8xxx) series.
+ */
+
+#define SPR_MQ 0x000 /* ..6. 601 MQ register */
+#define SPR_RTCU_R 0x004 /* ..6. 601 RTC Upper - Read */
+#define SPR_RTCL_R 0x005 /* ..6. 601 RTC Lower - Read */
+#define SPR_DSISR 0x012 /* ..68 DSI exception source */
+#define DSISR_DIRECT 0x80000000 /* Direct-store error exception */
+#define DSISR_NOTFOUND 0x40000000 /* Translation not found */
+#define DSISR_PROTECT 0x08000000 /* Memory access not permitted */
+#define DSISR_INVRX 0x04000000 /* Reserve-indexed insn direct-store access */
+#define DSISR_STORE 0x02000000 /* Store operation */
+#define DSISR_DABR 0x00400000 /* DABR match */
+#define DSISR_SEGMENT 0x00200000 /* XXX; not in 6xx PEM */
+#define DSISR_EAR 0x00100000 /* eciwx/ecowx && EAR[E] == 0 */
+#define SPR_DAR 0x013 /* ..68 Data Address Register */
+#define SPR_RTCU_W 0x014 /* ..6. 601 RTC Upper - Write */
+#define SPR_RTCL_W 0x015 /* ..6. 601 RTC Lower - Write */
+#define SPR_SDR1 0x019 /* ..68 Page table base address register */
+#define SPR_VRSAVE 0x100 /* ..6. AltiVec VRSAVE */
+#define SPR_ASR 0x118 /* ..6. Address Space Register (PPC64) */
+#define SPR_EAR 0x11a /* ..68 External Access Register */
+#define MPC601 0x0001
+#define MPC603 0x0003
+#define MPC604 0x0004
+#define MPC602 0x0005
+#define MPC603e 0x0006
+#define MPC603ev 0x0007
+#define MPC750 0x0008
+#define MPC604e 0x0009
+#define MPC604ev 0x000a
+#define MPC7400 0x000c
+#define MPC620 0x0014
+#define IBMRS64II 0x0033
+#define IBMRS64IIIp 0x0034
+#define IBMPOWER4 0x0035
+#define IBMRS64IIIi 0x0036
+#define IBMRS64IV 0x0037
+#define IBMPOWER4II 0x0038
+#define IBM970 0x0039
+#define IBMPOWER5GR 0x003a
+#define IBMPOWER5GS 0x003b
+#define IBM970FX 0x003c
+#define IBMPOWER6 0x003e
+#define IBMPOWER3 0x0040
+#define IBMPOWER3II 0x0041
+#define IBM970MP 0x0044
+#define IBM970GX 0x0045
+#define IBMCELL 0x0070
+#define MPC8240 0x0081
+#define PA6T 0x0090
+#define IBMPOWER6P5 0x0f00
+#define IBMSTB25 0x5151
+#define IBM750FX 0x7000
+#define IBM750GX 0x7002
+#define MPC7450 0x8000
+#define MPC7455 0x8001
+#define MPC7457 0x8002
+#define MPC7447A 0x8003
+#define MPC7448 0x8004
+#define MPC745X_P(v) ((v & 0xFFF8) == 0x8000)
+#define MPC7410 0x800c
+#define MPC5200 0x8011
+#define MPC8245 0x8081
+#define MPCG2 0x8082
+#define MPCe300c1 0x8083
+#define MPCe300c2 0x8084
+#define MPCe300c3 0x8085
+
+#define SPR_IBAT0U 0x210 /* ..68 Instruction BAT Reg 0 Upper */
+#define SPR_IBAT0L 0x211 /* ..6. Instruction BAT Reg 0 Lower */
+#define SPR_IBAT1U 0x212 /* ..6. Instruction BAT Reg 1 Upper */
+#define SPR_IBAT1L 0x213 /* ..6. Instruction BAT Reg 1 Lower */
+#define SPR_IBAT2U 0x214 /* ..6. Instruction BAT Reg 2 Upper */
+#define SPR_IBAT2L 0x215 /* ..6. Instruction BAT Reg 2 Lower */
+#define SPR_IBAT3U 0x216 /* ..6. Instruction BAT Reg 3 Upper */
+#define SPR_IBAT3L 0x217 /* ..6. Instruction BAT Reg 3 Lower */
+#define SPR_DBAT0U 0x218 /* ..6. Data BAT Reg 0 Upper */
+#define SPR_DBAT0L 0x219 /* ..6. Data BAT Reg 0 Lower */
+#define SPR_DBAT1U 0x21a /* ..6. Data BAT Reg 1 Upper */
+#define SPR_DBAT1L 0x21b /* ..6. Data BAT Reg 1 Lower */
+#define SPR_DBAT2U 0x21c /* ..6. Data BAT Reg 2 Upper */
+#define SPR_DBAT2L 0x21d /* ..6. Data BAT Reg 2 Lower */
+#define SPR_DBAT3U 0x21e /* ..6. Data BAT Reg 3 Upper */
+#define SPR_DBAT3L 0x21f /* ..6. Data BAT Reg 3 Lower */
+#define SPR_IBAT4U 0x230 /* ..6. Instruction BAT Reg 4 Upper */
+#define SPR_IBAT4L 0x231 /* ..6. Instruction BAT Reg 4 Lower */
+#define SPR_IBAT5U 0x232 /* ..6. Instruction BAT Reg 5 Upper */
+#define SPR_IBAT5L 0x233 /* ..6. Instruction BAT Reg 5 Lower */
+#define SPR_IBAT6U 0x234 /* ..6. Instruction BAT Reg 6 Upper */
+#define SPR_IBAT6L 0x235 /* ..6. Instruction BAT Reg 6 Lower */
+#define SPR_IBAT7U 0x236 /* ..6. Instruction BAT Reg 7 Upper */
+#define SPR_IBAT7L 0x237 /* ..6. Instruction BAT Reg 7 Lower */
+#define SPR_DBAT4U 0x238 /* ..6. Data BAT Reg 4 Upper */
+#define SPR_DBAT4L 0x239 /* ..6. Data BAT Reg 4 Lower */
+#define SPR_DBAT5U 0x23a /* ..6. Data BAT Reg 5 Upper */
+#define SPR_DBAT5L 0x23b /* ..6. Data BAT Reg 5 Lower */
+#define SPR_DBAT6U 0x23c /* ..6. Data BAT Reg 6 Upper */
+#define SPR_DBAT6L 0x23d /* ..6. Data BAT Reg 6 Lower */
+#define SPR_DBAT7U 0x23e /* ..6. Data BAT Reg 7 Upper */
+#define SPR_UMMCR2 0x3a0 /* ..6. User Monitor Mode Control Register 2 */
+#define SPR_UMMCR0 0x3a8 /* ..6. User Monitor Mode Control Register 0 */
+#define SPR_USIA 0x3ab /* ..6. User Sampled Instruction Address */
+#define SPR_UMMCR1 0x3ac /* ..6. User Monitor Mode Control Register 1 */
+#define SPR_MMCR2 0x3b0 /* ..6. Monitor Mode Control Register 2 */
+#define SPR_MMCR2_THRESHMULT_32 0x80000000 /* Multiply MMCR0 threshold by 32 */
+#define SPR_MMCR2_THRESHMULT_2 0x00000000 /* Multiply MMCR0 threshold by 2 */
+#define SPR_PMC5 0x3b1 /* ..6. Performance Counter Register 5 */
+#define SPR_PMC6 0x3b2 /* ..6. Performance Counter Register 6 */
+
+#define SPR_MMCR0 0x3b8 /* ..6. Monitor Mode Control Register 0 */
+#define MMCR0_FC 0x80000000 /* Freeze counters */
+#define MMCR0_FCS 0x40000000 /* Freeze counters in supervisor mode */
+#define MMCR0_FCP 0x20000000 /* Freeze counters in user mode */
+#define MMCR0_FCM1 0x10000000 /* Freeze counters when mark=1 */
+#define MMCR0_FCM0 0x08000000 /* Freeze counters when mark=0 */
+#define MMCR0_PMXE 0x04000000 /* Enable PM interrupt */
+#define MMCR0_FCECE 0x02000000 /* Freeze counters after event */
+#define MMCR0_TBSEL_15 0x01800000 /* Count bit 15 of TBL */
+#define MMCR0_TBSEL_19 0x01000000 /* Count bit 19 of TBL */
+#define MMCR0_TBSEL_23 0x00800000 /* Count bit 23 of TBL */
+#define MMCR0_TBSEL_31 0x00000000 /* Count bit 31 of TBL */
+#define MMCR0_TBEE 0x00400000 /* Time-base event enable */
+#define MMCRO_THRESHOLD(x) ((x) << 16) /* Threshold value */
+#define MMCR0_PMC1CE 0x00008000 /* PMC1 condition enable */
+#define MMCR0_PMCNCE 0x00004000 /* PMCn condition enable */
+#define MMCR0_TRIGGER 0x00002000 /* Trigger */
+#define MMCR0_PMC1SEL(x) ((x) << 6) /* PMC1 selector */
+#define MMCR0_PMC2SEL(x) ((x) << 0) /* PMC2 selector */
+#define SPR_PMC1 0x3b9 /* ..6. Performance Counter Register 1 */
+#define SPR_PMC2 0x3ba /* ..6. Performance Counter Register 2 */
+#define SPR_SIA 0x3bb /* ..6. Sampled Instruction Address */
+#define SPR_MMCR1 0x3bc /* ..6. Monitor Mode Control Register 2 */
+#define MMCR1_PMC3SEL(x) ((x) << 27) /* PMC 3 selector */
+#define MMCR1_PMC4SEL(x) ((x) << 22) /* PMC 4 selector */
+#define MMCR1_PMC5SEL(x) ((x) << 17) /* PMC 5 selector */
+#define MMCR1_PMC6SEL(x) ((x) << 11) /* PMC 6 selector */
+
+#define SPR_PMC3 0x3bd /* ..6. Performance Counter Register 3 */
+#define SPR_PMC4 0x3be /* ..6. Performance Counter Register 4 */
+#define SPR_DMISS 0x3d0 /* ..68 Data TLB Miss Address Register */
+#define SPR_DCMP 0x3d1 /* ..68 Data TLB Compare Register */
+#define SPR_HASH1 0x3d2 /* ..68 Primary Hash Address Register */
+#define SPR_HASH2 0x3d3 /* ..68 Secondary Hash Address Register */
+#define SPR_IMISS 0x3d4 /* ..68 Instruction TLB Miss Address Register */
+#define SPR_TLBMISS 0x3d4 /* ..6. TLB Miss Address Register */
+#define SPR_ICMP 0x3d5 /* ..68 Instruction TLB Compare Register */
+#define SPR_PTEHI 0x3d5 /* ..6. Instruction TLB Compare Register */
+#define SPR_RPA 0x3d6 /* ..68 Required Physical Address Register */
+#define SPR_PTELO 0x3d6 /* ..6. Required Physical Address Register */
+#define SPR_HID0 0x3f0 /* E.68 Hardware Implementation Register
+ 0 */
+#define SPR_HID1 0x3f1 /* E.68 Hardware Implementation Register
+ 1 */
+#define SPR_HID4 0x3f4 /* ..6. 970 HID4 */
+#define SPR_HID5 0x3f6 /* ..6. 970 HID5 */
+#define SPR_DABR 0x3f5 /* ..6. Data Address Breakpoint Register */
+#define SPR_MSSCR0 0x3f6 /* ..6. Memory SubSystem Control Register */
+#define MSSCR0_SHDEN 0x80000000 /* 0: Shared-state enable */
+#define MSSCR0_SHDPEN3 0x40000000 /* 1: ~SHD[01] signal enable in MEI mode */
+#define MSSCR0_L1INTVEN 0x38000000 /* 2-4: L1 data cache ~HIT intervention enable */
+#define MSSCR0_L2INTVEN 0x07000000 /* 5-7: L2 data cache ~HIT intervention enable */
+#define MSSCR0_DL1HWF 0x00800000 /* 8: L1 data cache hardware flush */
+#define MSSCR0_MBO 0x00400000 /* 9: must be one */
+#define MSSCR0_EMODE 0x00200000 /* 10: MPX bus mode (read-only) */
+#define MSSCR0_ABD 0x00100000 /* 11: address bus driven (read-only) */
+#define MSSCR0_BMODE 0x0000c000 /* 16-17: Bus Mode (read-only) (7450) */
+#define MSSCR0_ID 0x00000040 /* 26: Processor ID */
+#define MSSCR0_L2PFE 0x00000003 /* 30-31: L2 prefetching enabled (7450) */
+#define SPR_L2PM 0x3f8 /* ..6. L2 Private Memory Control Register */
+#define SPR_L2CR 0x3f9 /* ..6. L2 Control Register */
+#define L2CR_L2E 0x80000000 /* 0: L2 enable */
+#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */
+#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */
+#define L2SIZ_2M 0x00000000
+#define L2SIZ_256K 0x10000000
+#define L2SIZ_512K 0x20000000
+#define L2SIZ_1M 0x30000000
+#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */
+#define L2CLK_DIS 0x00000000 /* disable L2 clock */
+#define L2CLK_10 0x02000000 /* core clock / 1 */
+#define L2CLK_15 0x04000000 /* / 1.5 */
+#define L2CLK_35 0x06000000 /* / 3.5 */
+#define L2CLK_20 0x08000000 /* / 2 */
+#define L2CLK_25 0x0a000000 /* / 2.5 */
+#define L2CLK_30 0x0c000000 /* / 3 */
+#define L2CLK_40 0x0e000000 /* / 4 */
+#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */
+#define L2RAM_FLOWTHRU_BURST 0x00000000
+#define L2RAM_PIPELINE_BURST 0x01000000
+#define L2RAM_PIPELINE_LATE 0x01800000
+#define L2CR_L2DO 0x00400000 /* 9: L2 data-only.
+ Setting this bit disables instruction
+ caching. */
+#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */
+#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable).
+ Enables automatic operation of the
+ L2ZZ (low-power mode) signal. */
+#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */
+#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */
+#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */
+#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */
+#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */
+#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */
+#define L2CR_L2FA 0x00001000 /* 19: L2 flush assist (for software flush). */
+#define L2CR_L2HWF 0x00000800 /* 20: L2 hardware flush. */
+#define L2CR_L2IO 0x00000400 /* 21: L2 instruction-only. */
+#define L2CR_L2CLKSTP 0x00000200 /* 22: L2 clock stop. */
+#define L2CR_L2DRO 0x00000100 /* 23: L2DLL rollover checkstop enable. */
+#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */
+ /* progress (read only). */
+#define SPR_L3CR 0x3fa /* ..6. L3 Control Register */
+#define L3CR_RESERVED 0x0438003a /* Reserved bits in L3CR */
+#define L3CR_L3E 0x80000000 /* 0: L3 enable */
+#define L3CR_L3PE 0x40000000 /* 1: L3 data parity checking enable */
+#define L3CR_L3APE 0x20000000 /* 2: L3 address parity checking enable */
+#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */
+#define L3SIZ_1M 0x00000000
+#define L3SIZ_2M 0x10000000
+#define L3CR_L3CLKEN 0x08000000 /* 4: Enables the L3_CLK[0:1] signals */
+#define L3CR_L3CLK 0x03800000 /* 6-8: L3 clock ratio */
+#define L3CLK_60 0x00000000 /* core clock / 6 */
+#define L3CLK_20 0x01000000 /* / 2 */
+#define L3CLK_25 0x01800000 /* / 2.5 */
+#define L3CLK_30 0x02000000 /* / 3 */
+#define L3CLK_35 0x02800000 /* / 3.5 */
+#define L3CLK_40 0x03000000 /* / 4 */
+#define L3CLK_50 0x03800000 /* / 5 */
+#define L3CR_L3IO 0x00400000 /* 9: L3 instruction-only mode */
+#define L3CR_L3SPO 0x00040000 /* 13: L3 sample point override */
+#define L3CR_L3CKSP 0x00030000 /* 14-15: L3 clock sample point */
+#define L3CKSP_2 0x00000000 /* 2 clocks */
+#define L3CKSP_3 0x00010000 /* 3 clocks */
+#define L3CKSP_4 0x00020000 /* 4 clocks */
+#define L3CKSP_5 0x00030000 /* 5 clocks */
+#define L3CR_L3PSP 0x0000e000 /* 16-18: L3 P-clock sample point */
+#define L3PSP_0 0x00000000 /* 0 clocks */
+#define L3PSP_1 0x00002000 /* 1 clocks */
+#define L3PSP_2 0x00004000 /* 2 clocks */
+#define L3PSP_3 0x00006000 /* 3 clocks */
+#define L3PSP_4 0x00008000 /* 4 clocks */
+#define L3PSP_5 0x0000a000 /* 5 clocks */
+#define L3CR_L3REP 0x00001000 /* 19: L3 replacement algorithm (0=default, 1=alternate) */
+#define L3CR_L3HWF 0x00000800 /* 20: L3 hardware flush */
+#define L3CR_L3I 0x00000400 /* 21: L3 global invalidate */
+#define L3CR_L3RT 0x00000300 /* 22-23: L3 SRAM type */
+#define L3RT_MSUG2_DDR 0x00000000 /* MSUG2 DDR SRAM */
+#define L3RT_PIPELINE_LATE 0x00000100 /* Pipelined (register-register) synchronous late-write SRAM */
+#define L3RT_PB2_SRAM 0x00000300 /* PB2 SRAM */
+#define L3CR_L3NIRCA 0x00000080 /* 24: L3 non-integer ratios clock adjustment for the SRAM */
+#define L3CR_L3DO 0x00000040 /* 25: L3 data-only mode */
+#define L3CR_PMEN 0x00000004 /* 29: Private memory enable */
+#define L3CR_PMSIZ 0x00000004 /* 31: Private memory size (0=1MB, 1=2MB) */
+#define SPR_THRM1 0x3fc /* ..6. Thermal Management Register */
+#define SPR_THRM2 0x3fd /* ..6. Thermal Management Register */
+#define SPR_THRM_TIN 0x80000000 /* Thermal interrupt bit (RO) */
+#define SPR_THRM_TIV 0x40000000 /* Thermal interrupt valid (RO) */
+#define SPR_THRM_THRESHOLD(x) ((x) << 23) /* Thermal sensor threshold */
+#define SPR_THRM_TID 0x00000004 /* Thermal interrupt direction */
+#define SPR_THRM_TIE 0x00000002 /* Thermal interrupt enable */
+#define SPR_THRM_VALID 0x00000001 /* Valid bit */
+#define SPR_THRM3 0x3fe /* ..6. Thermal Management Register */
+#define SPR_THRM_TIMER(x) ((x) << 1) /* Sampling interval timer */
+#define SPR_THRM_ENABLE 0x00000001 /* TAU Enable */
+#define SPR_FPECR 0x3fe /* ..6. Floating-Point Exception Cause Register */
+#define SPR_PIR 0x3ff /* ..6. Processor Identification Register */
+
+/* Performance counter declarations */
+#define PMC_OVERFLOW 0x80000000 /* Counter has overflowed */
+
+/* The first five countable [non-]events are common to all the PMC's */
+#define PMCN_NONE 0 /* Count nothing */
+#define PMCN_CYCLES 1 /* Processor cycles */
+#define PMCN_ICOMP 2 /* Instructions completed */
+#define PMCN_TBLTRANS 3 /* TBL bit transitions */
+#define PCMN_IDISPATCH 4 /* Instructions dispatched */
+
+#endif /* !_POWERPC_SPR_H_ */
