Module Name: src
Committed By: wiz
Date: Wed Aug 7 19:07:09 UTC 2019
Modified Files:
src/share/man/man4: sb.4
Log Message:
New sentence, new line. Sort SEE ALSO.
To generate a diff of this commit:
cvs rdiff -u -r1.26 -r1.27 src/share/man/man4/sb.4
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/share/man/man4/sb.4
diff -u src/share/man/man4/sb.4:1.26 src/share/man/man4/sb.4:1.27
--- src/share/man/man4/sb.4:1.26 Mon Aug 5 15:06:47 2019
+++ src/share/man/man4/sb.4 Wed Aug 7 19:07:09 2019
@@ -1,4 +1,4 @@
-.\" $NetBSD: sb.4,v 1.26 2019/08/05 15:06:47 ryoon Exp $
+.\" $NetBSD: sb.4,v 1.27 2019/08/07 19:07:09 wiz Exp $
.\"
.\" Copyright (c) 1996 The NetBSD Foundation, Inc.
.\" All rights reserved.
@@ -56,20 +56,24 @@ the particular model).
The base I/O port address is usually jumper-selected to either 0x220 or
0x240 (newer cards may provide software configuration, but this driver
does not directly support them--you must configure the card for its I/O
-addresses with other software). The SoundBlaster takes 16 I/O ports.
+addresses with other software).
+The SoundBlaster takes 16 I/O ports.
For the SoundBlaster and SoundBlaster Pro, the IRQ and DRQ channels are
-jumper-selected. For the SoundBlaster 16, the IRQ and DRQ channels are
-set by this driver to the values specified in the config file. The IRQ
-must be selected from the set {5,7,9,10}.
+jumper-selected.
+For the SoundBlaster 16, the IRQ and DRQ channels are
+set by this driver to the values specified in the config file.
+The IRQ must be selected from the set {5,7,9,10}.
.Pp
The configuration file must use 1
.Cm flags
-specification to enable the Jazz16 support. This is to avoid potential
-conflicts with other devices when probing the Jazz 16 because it requires
-use of extra I/O ports not in the base port range.
+specification to enable the Jazz16 support.
+This is to avoid potential conflicts with other devices when probing
+the Jazz 16 because it requires use of extra I/O ports not in the
+base port range.
.Pp
With a SoundBlaster 16 card the device is full duplex, but it can
-only sensibly handle a precision of 8 bits. It does so by extending
+only sensibly handle a precision of 8 bits.
+It does so by extending
the output 8 bit samples to 16 bits and using the 8 bit DMA channel
for input and the 16 bit channel for output.
.Pp
@@ -86,13 +90,13 @@ has a midi device attached directly to t
.Sh SEE ALSO
.Xr aic 4 ,
.Xr audio 4 ,
+.Xr i386/pnpbios 4 ,
.Xr isa 4 ,
.Xr isapnp 4 ,
.Xr joy 4 ,
.Xr midi 4 ,
.Xr mpu 4 ,
-.Xr opl 4 ,
-.Xr i386/pnpbios 4
+.Xr opl 4
.Sh HISTORY
The
.Nm
@@ -102,5 +106,5 @@ device driver appeared in
Non-SCSI CD-ROM interfaces are not supported.
.Pp
The MIDI interface on the SB hardware is braindead, and the driver
-needs to busy wait while writing MIDI data. This will consume
-a lot of system time.
+needs to busy wait while writing MIDI data.
+This will consume a lot of system time.
