Module Name: src
Committed By: martin
Date: Thu Nov 14 15:42:47 UTC 2019
Modified Files:
src/doc [netbsd-9]: CHANGES-9.0
Log Message:
Tickets #422 - #426
To generate a diff of this commit:
cvs rdiff -u -r1.1.2.101 -r1.1.2.102 src/doc/CHANGES-9.0
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/doc/CHANGES-9.0
diff -u src/doc/CHANGES-9.0:1.1.2.101 src/doc/CHANGES-9.0:1.1.2.102
--- src/doc/CHANGES-9.0:1.1.2.101 Wed Nov 13 12:57:15 2019
+++ src/doc/CHANGES-9.0 Thu Nov 14 15:42:47 2019
@@ -1,4 +1,4 @@
-# $NetBSD: CHANGES-9.0,v 1.1.2.101 2019/11/13 12:57:15 martin Exp $
+# $NetBSD: CHANGES-9.0,v 1.1.2.102 2019/11/14 15:42:47 martin Exp $
A complete list of changes from the initial NetBSD 9.0 branch on 2019-07-30
until the 9.0 release:
@@ -5660,3 +5660,48 @@ bin/pax/Makefile 1.40
PR bin/54468: install manual pages for tar and cpio only once.
[nakayama, ticket #421]
+sys/dev/pci/ixgbe/ixv.c 1.140
+
+ ixv(4): disable RSS configuration on 82599 and X540 VFs.
+ [msaitoh, ticket #422]
+
+sys/netipsec/key.c 1.268,1.269
+
+ Fix SA can be expaired wrongly when there are many SPs.
+ Reduce load for IKE negotiations when the system has many IPv6
+ addresses.
+ [knakahara, ticket #423]
+
+sys/net/if_loop.c 1.108,1.109
+
+ Fix a bug that an IP broadcast packet back to myself
+ is dropped by bad checksum when an interface's checksum
+ offload is set.
+ [msaitoh, ticket #424]
+
+sys/arch/amiga/dev/if_qn.c 1.48
+sys/arch/amiga/dev/zssc.c 1.46
+sys/arch/mac68k/obio/iwm_fd.c 1.57
+sys/arch/mvme68k/dev/wdsc.c 1.33
+sys/arch/next68k/dev/nextdisplay.c 1.22
+sys/dev/gpib/ct.c 1.31
+sys/dev/gpib/mt.c 1.33
+sys/dev/gpib/ppi.c 1.25
+sys/dev/isa/if_iy.c 1.111
+sys/dev/isa/mcd.c 1.119
+sys/dev/isa/tcic2_isa.c 1.28
+sys/dev/isa/uha_isa.c 1.42
+sys/dev/pci/if_stge.c 1.73
+sys/dev/pci/neo.c 1.55
+sys/dev/pcmcia/if_tr_pcmcia.c 1.29
+sys/dev/sbus/sio16.c 1.25
+
+ Correctly initialize sc_dev.
+ [msaitoh, ticket #425]
+
+sys/dev/pci/pucdata.c 1.105
+
+ puc(4): the 16C1054 and 16C1058 serial multi-port controllers need
+ a clock multiplier of 8, just like the 16C1050 controller.
+ [hauke, ticket #426]
+
